Adventures & experiences in contemporary technology
A new feature came with Firefox 44 that only recently started to come to my notice with Yahoo Mail offering to set up browser notifications for every time when a new email arrives there. This is something that I did not need and yet I did not get the option to switch it off permanently for that website so I was being nagged every time I when to check on things for that email address, an unneeded irritation. Other websites offered to set up similar push notifications but you could switch these off permanently so it is a site by site function unless you take another approach.
That is to open a new browser tab and enter about:config in the address bar before hitting the return key. If you have not done this before, a warning message will appear but you can dismiss this permanently. Once beyond that, you are presented with a searchable list of options and the ones that you need are dom.webnotifications.enabled and dom.webnotifications.serviceworker.enabled. By default, the corresponding entries in the Value column will be true. Double-clicking on each one will set it to false and you should not see any more offers of push notifications that allow you get alerts from web services like Yahoo Mail so your web browsing should suffer less of these intrusions.
One thing that I notice with Firefox installations in both Ubuntu and Linux Mint is that a dialogue box appears when closing down the web browser asking whether to save the open session or if you want to have a fresh session the next time that you start it up. Initially, I was always in the latter camp but there are times when I took advantage of that session saving feature for retaining any extra tabs containing websites to which I want to return or editor sessions for any blog posts that I still am writing; sometimes, composing the latter can take a while.
To see where this setting is located, you need to open a new tab and type about:config in the browser’s address bar. This leads to advanced browser settings so you need click OK in answer to a warning message before proceeding. Then, start looking for browser.showQuitWarning using the Search bar; it acts like a dynamic filter on screen entries until you get what you need. On Ubuntu and Linux Mint, the value is set to true but false is the default elsewhere; unlike Opera, Firefox generally does not save sessions by fault unless you tell it to that (at least, that has been my experience anyway). Setting true to false or vice versa will control the appearance or non-appearance of the dialogue box at browser session closure time.
On one of my websites, I use Textpattern with CKEditor for editing of articles on there. This was working well until I upgraded CKEditor to a version with a number of 4.1 or newer because it started to change the HTML in my articles when I did not want it to do so, especially when it broke the appearance of the things. A search on Google revealed an unhelpful forum exchange that produced no solution to the issue so I decided to share one on here when I found it.
What I needed to do was switch off what is known as Advanced Content Filtering. It can be tuned but I felt that would take too much time so I implemented something like what you see below in the config.js with the ckeditor folder:
CKEDITOR.editorConfig = function( config ) {
config.allowedContent = true;
};
All settings go with the outer function wrapper and setting the config.allowedContent property to true within there sorted my problem as I wanted. Now, any HTML remains untouched and I am happy with the outcome. It might be better for features like Advanced Content Filtering to be switched off by default and turned on by those with the time and need for it, much like the one of the principles adopted by the WordPress project. Still, having any off switch is better than none at all.
It was an article in a magazine that revealed these legal BitTorrent download sites to me, so I thought that I’d keep them on file for future reference while also sharing them with others who might need them. As far as I am aware, they are all legal in that no copyrighted material is on there. If that changes, I am happy to know and make amendments as needed.
My own interest in torrents arises from their being a convenient way to download installation disk images for Linux distributions, and at least one of the entries is devoted to just that. However, the distribution also lends itself to movies along with music and books, so that is reflected below too. With regard to downloading actual multimedia content, there is so much illegal downloading that a list like this is needed and has blackened the reputation of BitTorrent too because it only ever was conceived as a means for distributing large files in a peer-to-peer manner without the use of a single server. Of course, any use can be found for a technology, and it never has to be legal or morally acceptable either.
Though I keep a little eye on WordPress development, it is no way near as rigorous as when I submitted a patch that got me a mention on the contributor list of a main WordPress release. That may explain how the full editor setting, which is turned on by default passed by on me without my taking much in the way of notice of it.
WordPress has become so mature now that I almost do not expect major revisions like the overhauls received by the administration back-end in 2008. The second interface was got so right that it still is with us and there were concerns in my mind at the time as to how usable it would be. Sometimes, those initial suspicions can come to nothing.
However, WordPress 4.0 brought a major change to the editor and I unfortunately am not sure that it is successful. A full height editor sounds a good idea in principle but I found some rough edges to its present implementation that leave me wondering if any UX person got to reviewing it. The first reason is that scrolling becomes odd with the editor’s toolbar becoming fixed when you scroll down far enough on an editor screen. The sidebar scrolling then is out of sync with the editor box, which creates a very odd sensation. Having keyboard shortcuts like CTRL+HOME and CTRL+END not working as they should only convinced me that the new arrangement was not for me and I wanted to turn it off.
A search with Google turned up nothing of note so I took to the WordPress.org forum to see if I could get any joy. That revealed that I should have thought of looking in the screen options dropdown box for an option called “Expand the editor to match the window height” so I could clear that tickbox. Because of the appearance of a Visual Editor control on there, I looked on the user profile screen and found nothing so the logic of how things are set up is sub-optimal. Maybe, the latter option needs to be a screen option now too. Thankfully, the window height editor option only needs setting once for both posts and pages so you are covered for all eventualities at once.
With a distraction-free editing option, I am not sure why someone went for the full height editor too. If WordPress wanted to stick with this, it does need more refinement so it behaves more conventionally. Personally, I would not build a website with that kind of ill-synchronised scrolling effect so it is something needs work as does the location of the Visual Editor setting. It could be that both settings need to be at the user level and not with one being above that level while another is at it. Until I got the actual solution, I was faced with using distraction-free mode all the time and also installed the WP Editor plugin too. That remains due to its code highlighting even if dropping into code view always triggers the need to create a new revision. Despite that, all is better in the end.
The default PHP version on my outdoors, travel and photography website is 5.2.17 and that is getting on a bit now since it is no longer supported by the PHP project and has not been thus since 2011. One obvious impact was Piwik, which I used for web analytics and needs at least 5.3.2. WordPress 4.0 even needs 5.2.24 so that upgrade became implausible so I contacted Webfusion’s support team and they showed me how to get to at least 5.3.3 and even as far as 5.5.9. The trick is the addition of a line of code to the .htaccess file (near the top was my choice) like one of the following:
PHP 5.3.x
AddHandler application/x-httpd-php53 .php
PHP 5.5.x
AddHandler application/x-httpd-php55 .php
When I got one of these in place, things started to look promising but for a locked database due to my not watching how big it had got. Replacing it with two additional databases addressed the problem of losing write access though there was a little upheaval caused by this. Using PHP 5.5.9 meant that I spotted messages regarding the deprecation of the mysql_connect function so that needed fixing too (prefixing it with @ might be a temporary fix but a more permanent one always is better so that is what I did in the form of piggybacking off what WordPress uses; MySQLi and PDO_MySQL are other options). Sorting the database issue meant that I saw the upgrade message for WordPress as well as a mix of plugins and themes so all looked better and I need worry less about losing security updates. Also, I am up to the latest version of Piwik too and that’s an even better way to be.
One of the disadvantages of my Google/Asus Nexus 7 is that it needs a Wi-Fi connection to use. Most of the time this is not a problem since I also have a Huawei mobile WiFi hub from T-Mobile and this seems to work just about anywhere in the U.K. Away from the U.K. though, it won’t work because roaming is not switched on for it and that may be no bad thing with the fees that could introduce. My HTC Desire S could deputise but I need to watch costs with that too.
There’s also the factor of download caps and those apply both to the Huawei and to the HTC. Recently, I added Anquet‘s Outdoor Map Navigator (OMN) to my Nexus 7 through the Google Play store for a fee of £7 and that allows access to any walking maps that I have bought from Anquet. However, those are large downloads so the caps start to come into play. Frugality would help but I began to look at other possibilities that make use of a laptop’s Wi-Fi functionality.
Looking on the web, I found two options for this that work on Windows 7 (8 should be OK too): Connectify Hotspot and Virtual Router Manager. The first of these is commercial software but there is a Lite edition for those wanting to try it out; that it is not a time limited demo is not something that I can confirm though that did not seem to be the case since it looked as if only features were missing from it that you’d get if you paid for the Pro variant. The second option is an open source one and is free of charge apart from an invitation to donate to the project.
Though online tutorials show the usage of either of these to be straightforward, my experiences were not all that positive at the outset. In fact, there was something that I needed to do and that is why this post has come to exist at all. That happened even after the restart that Conectify Hotspot needed as part of its installation; it runs as a system service so that’s why the restart was needed. In fact, it was Virtual Router Manager that told me what the issue was and it needed no reboot. Neither did it cause network disconnection of a laptop like the Connectify offering did on me and that was the cause of its ejection from that system; limitations in favour of its paid addition aside, it may have the snazzier interface but I’ll take effective simplicity any day.
Using Virtual Router Manager turns out to be simple enough. It needs a network name (also known as an SSID), a password to restrict who accesses the network and the internet connection to be shared. In my case, the was Local Area Connection on the drop down list. With all the required information entered, I was ready to start the router using the Start Network Router button. The text on this changes to Stop Network Router when the hub is operational or at least it should have done for me on the first time that I ran it. What I got instead was the following message:
The group or resource is not in the correct state to perform the requested operation.
The above may not say all that much but it becomes more than ample information if you enter it into the likes of Google. Behind the scenes, Virtual Router Manager is using native Windows functionality is create a WiFi hub from a PC and it appears to be the Microsoft Virtual Wi-Fi Miniport Adapter from what I have seen. When I tried setting up an adhoc Wi-Fi network from a laptop to the Nexus 7 using Windows’ own network set up capability via its Control Panel, it didn’t do what I needed so there might be something that third party software can do. So, the interesting thing about the solution to my Virtual Router Manager problem was that it needed me to delve into the innards of Windows a little.
Firstly, there’s running Command Prompt (All Programs > Accessories) from the Start Menu with Administrator privileges. It helps here if the account with which you log into Windows is in the Administrators group since all you have to do then is right click on the Start Menu entry and choose Run as administrator entry in the pop-up context menu. With a command line window now open, you then need to issue the following command:
netsh wlan set hostednetwork mode=allow ssid=[network name] key=[password] keyUsage=persistent
When that had done its thing, Virtual Router Manager worked without a hitch though it did turn itself after a while and that may be no bad thing from the security standpoint. On the Android side, it was a matter of going in Settings > Wi-Fi and choose the new network that have been creating on the laptop. This sort of thing may apply to other types of tablet (Dare I mention iPads?) so you could connect anything to the hub without needing to do any more on the Windows side.
For those wanting to know what’s going on behind the scenes on Windows, there’s a useful tutorial on Instructables that shows what third party software is saving you from having to do. Even if I never go down the more DIY route, I probably have saved myself having to buy a mobile Wi-Fi hub for any trips to Éire. For now, the Irish 3G dongle that I already have should be enough.
Left to its own devices, Debian will leave you with an ever ageing re-branded version of Firefox that was installed at the same time as the rest of the operating system. From what I have found, the main cause of this was that Mozilla’s wanting to retain control of its branding and trademarks in a manner not in keeping with Debian’s Free Software rules. This didn’t affect just Firefox but also Thunderbird, Sunbird and Seamonkey with Debian’s equivalents for these being IceDove, IceOwl and IceApe, respectively.
While you can download a tarball of Firefox from the web and use that, it’d be nice to get a variant that updated through Debian’s normal apt-get channels. In fact, IceWeasel does get updated whenever there is a new release of Firefox even if these updates never find their way into the usual repositories. While I have been know to take advantage of the more frozen state of Debian compared with other Linux distributions, I don’t mind getting IceWeasel updated so it isn’t a security worry.
The first step in so doing is to add the following lines to /etc/apt/sources.list using root access (using sudo, gksu or su to assume root privileges) since the file normally cannot be edited by normal users:
deb http://backports.debian.org/debian-backports squeeze-backports main
deb http://mozilla.debian.net/ squeeze-backports iceweasel-release
With the file updated and saved, the next step is to update the repositories on your machine using the following command:
sudo apt-get update
With the above complete, it is time to overwrite the existing IceWeasel installation with the latest one using an apt-get command that specifies the squeeze-backports repository as its source using the -t switch. While IceWeasel is installed from the iceweasel-release squeeze-backports repository, there dependencies that need to be satisfied and these come from the main squeeze-backports one. The actual command used is below:
sudo apt-get install -t squeeze-backports iceweasel
While that was all that I needed to do to get IceWeasel 18.0.1 in place, some may need the pkg-mozilla-archive-keyring package installed too. For those needing more information that what’s here, there’s always the Debian Mozilla team.
For whatever reason, my installation of Ubuntu GNOME Remix 12.10, didn’t have Quicktime support added to Firefox by default. To make a website work near enough as it was intended, this needed to be remedied. The solution was to issue a command to install the missing software:
sudo apt-get install mplayer gnome-mplayer gecko-mediaplayer
Mplayer is the main component here but running the above command adds all the required supporting packages too so that a Firefox restart was all that needed to get things going.
One of my PC’s has ended up becoming a testing ground for a number of Linux distributions. The list has included openSUSE, Fedora, Arch and LMDE with Sabayon being the latest incumbent. From Arch onwards in that list though, a message has appeared on loading the desktop with every one of these when I have Dropbox’s client set up on there:
Unable to monitor entire Dropbox folder hierarchy. Please run “echo 100000 | sudo tee /proc/sys/fs/inotify/max_user_watches” and restart Dropbox to correct the problem.
Even applying the remedy that the message suggests won’t permanently fix the problem. For that, you need to edit /etc/sysctl.conf with superuser access and add the following line to it:
fs.inotify.max_user_watches = 100000
With that in place, you can issue the following command to fix the problem in the current session (assuming your user account is listed in /etc/sudoers):
sudo sysctl -p & dropbox stop & dropbox start
A reboot should demonstrate that the messages no longer appear again. For a good while, I had ignored it but curiosity eventually got me to find out how it could be stopped and led to what you find above.