Adventures & experiences in contemporary technology
In Windows 10, the preferred place to look if you fancy prompting an update of the system is in the Update & Security section of the Settings application. At the top is the Windows Update and the process usually is as simple as pressing the Check for updates button. For most of the time, that has been my experience but it stopped working on my main Windows 10 virtual machine so I needed to resolve the problem.
Initially, going into the Advanced Options section and deselecting the tick box for Give me updates for other Microsoft products when I update Windows helped but it seemed a non-ideal solution so I looked further. It was then that I found that manually resetting a system’s Windows Updates components helped others so I tried that and restarted the system.
The first part of the process was to right-click on the Start Menu button and select the Windows PowerShell (Admin) entry from the menu that appeared. This may be replaced by Command Prompt (Admin) on your system on your machine, but the next steps in the process are the same. In fact, you could include any commands you see below in a script file and execute that if you prefer. Here, I will run through each group in succession.
From either PowerShell or the Command Prompt, you need to stop the Windows Update, Cryptographic, BITS (or Background Intelligent Transfer Service) and MSI Installer services. To accomplish this, execute the following commands at a command prompt:
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
With the services stopped, it is then possible to rename the SoftwareDistribution and Catroot2 folders so you can refresh everything to remove them. To accomplish this, execute the following pair of commands using either PowerShell or the Command Prompt:
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 Catroot2.old
Once you have the folders renamed, then you can start the Windows Update, Cryptographic, BITS and MSI Installer services by executing the following commands in either PowerShell or the Command Prompt:
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
Once these have completed, you may close the PowerShell or Command Prompt window that you were using and restart the machine. Going into the Update & Security section of the Settings tool afterwards and pressing the Check for updates button now builds new versions of the folders that you renamed and this takes a little while longer than the usual update process. Otherwise, you could let your system rebuild things in its own time. As it happens, I opted for manual intervention and all has worked well since then.
In the world of UNIX and Linux, symbolic links are shortcuts but they do not work like normal Windows shortcuts because you do not jump from one location to another with the file manager’s address bar changing what it shows. Instead, it is as if you see the contents of the directory at another quicker to access location in the file system and the same sort of thinking applies to files too. In some ways, it is like giving files and directories alternative aliases. There are soft links that point to the name of a given directory or file and hard links that point to actual files or directories.
For a long time, I was under the mistaken impression that such things did not exist in Windows until I came across the mklink command, which came with the launch of Windows Vista at the start of 2007. While the then new feature may not be an obvious to most of us, it does does that Windows did incorporate a feature from UNIX and Linux well before the advent of virtual desktops on Windows 10.
By default, the aforementioned command sets up symbolic links to files and the /D switch allows the same to be done for directories too. The /H switch makes a hard link instead of a soft link so we get much of the functionality of the ln command in UNIX and Linux. Here is an example that creates a soft symbolic link for a directory:
mklink /D shortcut target_directory
Above, shortcut is the name of the symbolic link file and target_directory is the destination to which it links. In my experience, it works best for destinations beyond your home folder and, from what I have read, hard links may not be possible across different disks either.
On Friday, I was working on a system where a session is instantiated from a stored virtual machine that produces a fresh session every time so all previous changes get lost. What I have is a batch script that I run to reinstate what I need and I encountered another task that I wanted it to do.
Part of my work involves the creation of plain text files with the extension lst and this is getting associated with SAS instead of Notepad. While you can reassign such associations using the GUI, it would be nice to do it via the command line too so the assoc and ftype commands caught my interest. The first of these associates a file with a given extension with a desired file type while the second shows the available file types together with the associated applications that open them. The assoc command also show all the associations that are in place when it is executed with no parameters and the ftype command does the same for file types.
Once you have picked out a file type with the ftype command, then the assoc can be used like the following:
assoc .lst=txtfile
The above associates an extension with a file type. In the this, .lst files are going to get opened by Notepad because of the txtfile association. Though it did not do what I wanted on Friday due to system lockdown, it is good to know that this is possible and that even the Windows command line supports goodies like these.
Here are some Linux commands that I encountered in a feature article in the current issue of Linux User & Developer that I had not met before:
cd --
This returns you to the previous directory where you were before with having to go back through the folder hierarchy to get there and is handy if you are jumping around a file system and any other means is far from speedy.
lsb_release -a
It can be useful to uncover what version of a distro you have from the command line and the above works for distros as diverse as Linux Mint, Debian, Fedora (it automatically installs in Fedora 22 if it is not installed already, a more advanced approach than showing you the command like in Linux Mint or Ubuntu), openSUSE and Manjaro. These days, the version may not change too often but it still is good to uncover what you have.
yum install fedora-upgrade
This one can be run either with sudo or in a root session started with su and it is specific to Fedora. The command performs an upgrade of the Fedora distro itself and I wonder if the functionality has been ported to the dnf command that has taken over from yum. My experiences with that in Fedora 22 so far suggest that it should be the case though I need to check that further with the VirtualBox VM that I have created.
The progress of Windows 10 is something that I have been watching. Early signs have been promising and the most recent live event certainly contained its share of excitement. The subsequent build that was released was another step in the journey though the new Start Menu appears more of a work in progress than it did in previous builds. Keeping up with these advances sometimes steps ahead of VirtualBox support for them and I discovered that again in the last few days. VMware Player seems unaffected so I thought that I’d try a migration of the VirtualBox VM with Windows 10 onto there. In the past, I did something similar with a 32-bit instance of Windows 7 that subsequently got upgraded all the the way up to 8.1 but that may not have been as slick as the latest effort so I thought that I would share it here.
The first step was to export the virtual machine as an OVF appliance and I used File > Export Appliance… only to make a foolish choice regarding the version of OVF. The one that I picked was 2.0 and I subsequently discovered that 1.0 was the better option. The equivalent command line would look like the following (there are two dashes before the ovf10 option below):
VboxManage export [name of VM] -o [name of file].ova --ovf10
VMware have a tool for extracting virtual machines from OVF files that will generate a set of files that will work with Player and other similar products of theirs. It goes under the unsurprising name of OVF Tool and it usefully works from a command line session. When I first tried it with an OVF 2.0 files, I got the following error and it stopped doing anything as a result:
Line 2: Incorrect namespace http://schemas.dmtf.org/ovf/envelope/2 found.
The only solution was to create a version 1.0 file and use a command like the following (it’s a single line though it wraps over two here and there are two dashes before the lax switch):
ovftool --lax [name of file].ova [directory location of VM files]/[name of file].vmx
The --lax option is needed to ensure successful execution even with an OVF 1.0 file as the input. Once I had done this on my Ubuntu GNOME system, the virtual machine could be opened up on VMware Player and I could use the latest build of Windows 10 at full screen, something that was not possible with VirtualBox. This may be how I survey the various builds of the operating that appear before its final edition is launched later this year.
It seems that the Rename-Item commandlet in Powershell is a very useful tool when it comes to smarter renaming of files. Even text substitution is a possibility and what follows is an example that takes the output of the Dir command for listing the files in a directory and replaces hyphens with underscores in each one.
Dir | Rename-Item –NewName { $_.name –replace “-“,”_” }
The result is that something like the-file.txt becomes the_file.txt. This behaviour is reminiscent of the rename command found on Linux and UNIX systems, where regular expressions can be used like in the following example that has the same result as the above:
rename ‘s/-/_/g’ *
In both cases, you do need to be careful as to what files are in a directory for this though the wildcard syntax on Linux or UNIX will be more familiar who has worked with files via almost any command line. Another thing to watch in the UNIX world is that ** parses the whole directory structure and that could be something that is not wanted for much of the time.
All of this is a far cry from the capabilities of the ren or rename command used in the days of MS-DOS and what has become the legacy Windows command line. Apart from simple renaming, any attempt at tweaking a filename through substitution ended up with the extra string getting appended to filenames when I tried it. Thus, the Powershell option looks better in comparison.
Recently, a timestamp got changed on an otherwise unaltered file on me and I needed to change it back. Luckily, I found an answer on the web that used PowerShell to do what I needed and I am recording it here for future reference. The possible commands are below:
$(Get-Item temp.txt).creationtime=$(Get-Date "27/10/2014 04:20 pm")
$(Get-Item temp.txt).lastwritetime=$(Get-Date "27/10/2014 04:20 pm")
$(Get-Item temp.txt).lastaccesstime=$(Get-Date "27/10/2014 04:20 pm")
The first of these did not interest me since I wanted to leave the file creation date as it was. The last write and access times were another matter because these needed altering. The Get-Item commandlet brings up the file, so its properties can be set. Here, these include creationtime, lastwritetime and lastaccesstime. The Get-Date commandlet reads in the provided date and time for use in the timestamp assignment. While PowerShell itself is case-insensitive, I have opted to show the camel case that is produced when you are tabbing through command options for the sake of clarity.
The Get-Item and Get-Date have aliases of gi and gd, respectively and the Get-Alias commandlet will show you a full list while Get-Command (gcm) gives you a list of commandlets. Issuing the following gets you a formatted list that is sent to a text file:
gcm | Format-List > temp2.txt
There is some online help but it is not quite as helpful as it ought to be so I have popped over to Microsoft Learn whenever I needed extra enlightenment. Here is a command that pops the full thing into a text file:
Get-Help Format-List -full > temp3.txt
In fact, getting a book might be the best way to find your way around PowerShell because of all its commandlets and available objects.
For now, other commands that I have found useful include the following:
Get-Service | Format-List
New-Item -Name test.txt -ItemType "file"
The first of these gets you a list of services while the second creates a new blank text file for you and it can create new folders for you too. Other useful commandlets are below:
Get-Location (gl)
Set-Location (sl)
Copy-Item
Remove-Item
Move-Item
Rename-Item
The first of the above is like the cwd or pwd commands that you may have seen elsewhere in that the current directory location is given. Then, the second will change your directory location for you. After that, there are commandlets for copying, deleting, moving and renaming files. These also have aliases so users of the legacy Windows command line or a UNIX or Linux shell can use something that is familiar to them.
Little fixes like the one with which I started this piece are all very good to know but it is in scripting that PowerShell really is said to show its uses. Having seen the usefulness of such things in the world on Linux and UNIX, I cannot disagree with that and PowerShell has its own IDE too. That may be just as well given how much there is to learn. That especially is the case when you might need to issue the following command in a PowerShell session opened using the Run as Administrator option just to get the execution as you need it:
Set-ExecutionPolicy RemoteSigned
Issuing Get-ExecutionPolicy will show you if this is needed when the response is: Restricted. A response of RemoteSigned shows you that all is in order, though you need to check that any script you then run has no nasty payload in there, which is why execution is restrictive in the first place. This sort of thing is yet another lesson to be learnt with PowerShell.
The release of CentOS 7 stoked my curiosity so I gave it a go in a VirtualBox virtual machine. It uses GNOME Shell in classic mode so the feel is not too far removed from that of GNOME 2. One thing to watch though is that it needs at least version 4.3.14 of VirtualBox or the Guest Additions kernel drivers will not compile at all. That might sound surprising when you learn that the kernel version is 3.10.x and that for GNOME Shell is 3.8.4. Much like Debian production releases, more established versions are chosen for the sake of stability and that fits in with the enterprise nature of the intended user base. Even with that more conservative approach, the results still please the eye though attempting to change the desktop background picture managed to freeze the machine. Other than that, most things work fine.
Even so, there are unexpected things to be encountered and one that I spotted was that network connectivity needed to switched on every time the VM was started. The default installation gives rise to this state of affairs and it is a known situation with CentOS from at least version 6 of the distribution and is not so hard to fix once you know what to do.
What you need to do is look for the relevant configuration file in /etc/sysconfig/network-scripts/ and update that. Using the ifconfig command, I found that the name of the network interface. Usually, this is something like eth0 but it was enp0s3 in my case so I had to look for a file named ifcfg-enp0s3 and edit that. The text that is sought is ONBOOT=no and that needs to become ONBOOT=yes for network connections to start automatically. To do something similar from the command line, CentOS had suggested the following:
sed -i -e ‘s@^ONBOOT=”no@ONBOOT=”yes@’ ifcfg-enp0s3
The above uses sed to do an inline (and case insensitve) edit of the file to change the offending no to a yes, once you have dropped in the /etc/sysconfig/network-scripts/ directory. My edit was done manually with Gedit so that works too. One thing to add is that any file editing needs superuser privileges so switching to root with the su command and using sudo is in order here.
With a growing collection of photographic images, I often find myself making backups of files using copy commands and the data volumes are such that I don’t want to keep copying the same files over and over again so incremental file transfers are what I need. So commands like the following often get issued from a Linux command line:
cp -pruv [source] [destination]
Because this is in Linux, it the bash shell that I use so the switches may not apply to others like ssh, fish or ksh. For my case, p preserves file properties such as its time and date and the cp command does not do this always so it needs adding. The r switch is useful because the copy then in recursive so only a directory needs to specified as the source and the destination needs to be one level up from a folder with the same name there so as to avoid file duplication. It is the u switch that makes the file copy incremental and the v one issues messages to the shell that show how the copying is going. Seeing a file name issued by the latter does tell you how much more needs to be copied and that the files are going where they should.
What inspired this post though is my need to do the same in a Windows session and issuing xcopy commands will achieve the same end. Here are two that will do the needful:
xcopy [source] [destination] /d /s
xcopy [source] [destination] /d /e
In both cases, it is the d switch that ensures that the copy is incremental and you can add a date too, with a colon between it and the /d, if you see fit. The s switch copies only directories that contain files while the e one copies even empty directories. Using the d switch without either of those did not trigger any copying action when I tried so I reckon that you cannot do without either of them. By default, both of these commands issue output to the command line so you can keep an eye on what is happening and this especially is useful when ensuring that files are going to the right destination because the behaviour differs from that of the bash shell in Linux.
After having Sabayon running on a PC until it came to pieces after an attempted version upgrade, I went away from the Linux distro for a while and Linux Mint now runs on the aforementioned machine. It only was a certain curiosity that got me installing it into a virtual machine on VirtualBox to see if my command line method of keeping the system up to date was the cause or whether rolling or partially-rolling distros have a certain fragility that is not seen in their discrete release counterparts.
Recently that ran into a hitch, the Sabayon package manager Rigo failed to start up for me. After waiting to see if it sorted itself on its own, I looked into returning to those command line ways and that line of enquiry led me to a method of restoring Rigo’s functionality from Sabayon’s wiki page on the underlying Entropy. The first step was to issue a command to become root:
su
That needed the appropriate password and the next command issued updated Sabayon’s repositories:
equo update
Once that had done its thing, it was time to install new versions of Entropy and Rigo:
equo install entropy rigo
With that complete, it was time to exit the root session with the exit command. Then, it was time to try running Rigo and it worked as expected. Any thoughts of adding in the superseded Sulfur (Rigo’s predecessor) were banished on seeing that success.