TOPIC: SU
Grouping directories first in output from ls commands executed in terminal sessions on macOS and Linux
14th February 2026
This enquiry began with my seeing directories and files being sorted by alphabetical order without regard for type in macOS Finder. In Windows and Linux file managers, I am accustomed to directories and files being listed in distinct blocks, albeit within the same listings, with the former preceding the latter. What I had missed was that the ls command and its aliases did what I was seeing in macOS Finder, which perhaps is why the operating system and its default apps work like that.
Over to Linux
On the zsh implementation that macOS uses, there is no way to order the output so that directories are listed before files. However, the situation is different on Linux because of the use of GNU tooling. Here, the --group-directories-first switch is available, and I have started to use this on my own Linux systems, web servers as well as workstations. This can be set up in .bashrc or .bash_aliases like the following:
alias ls='ls --color=auto --group-directories-first'
alias ll='ls -lh --color=auto --group-directories-first'
Above, the --color=auto switch adds colour to the output too. Issuing the following command makes the updates available in a terminal session (~ is the shorthand for the home directory below):
source ~/.bashrc
Back to macOS
While that works well on Linux, additional tweaks are needed to implement the same on macOS. Firstly, you have to install Homebrew using this command (you may be asked for your system password to let the process proceed):
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
To make it work, this should be added to the .zshrc file in your home folder:
export PATH="/opt/homebrew/opt/coreutils/libexec/gnubin:$PATH"
Then, you need to install coreutils for GNU commands like gls (a different name is used to distinguish it from what comes with macOS) and adding dircolors gives you coloured text output as well:
brew install coreutils
brew install dircolors
Once those were in place, I found that adding these lines to the .zshrc file was all that was needed (note those extra g's):
alias ls='gls --color=auto --group-directories-first'
alias ll='gls -lh --color=auto --group-directories-first'
If your experience differs, they may need to be preceded with this line in the same configuration file:
eval "$(dircolors -b)"
The final additions then look like this:
export PATH="/opt/homebrew/opt/coreutils/libexec/gnubin:$PATH"
eval "$(dircolors -b)"
alias ls='gls --color=auto --group-directories-first'
alias ll='gls -lh --color=auto --group-directories-first'
Following those, issuing this command will make the settings available in your terminal session:
source ~/.zshrc
Closing Remarks
In summary, you have learned how to list directories before files, and not intermingled as is the default situation. For me, this discovery was educational and adds some extra user-friendliness that was not there before the tweaks. While we may be considering two operating systems and two different shells (bash and zsh), there is enough crossover to make terminal directory and file listing operations function consistently regardless of where you are working.
Something to try when you get a message like this caused by a filename with a leading hyphen: "mv: illegal option -- u"
3rd December 2024
Recently, I downloaded some WEBP files from Ideogram and attempted to move them to another folder. That is when I got the message that you see in the title of this entry. Because I had not looked at the filenames, I baffled when I got this from a simple command that I had been using with some success until then. Because I was using an iMac, I tried the suggestion of installing coreutils to get GNU mv and cp to see if that would help:
brew install coreutils
The above command gave me gmv and gcp for the GNU versions of mv and cp that comes with macOS. Trying gmv only got me the following message:
gmv: cannot combine --backup with --exchange, -n, or --update=none-fail
The ls command could list all files, but not the WEBP ones. Thus, I executed the following to show what I wanted:
ls | grep -i webp
That got around the problem by doing a subset of the directory listing. It was then that I spotted the leading hyphen. To avoid the problem tripping me up again, I renamed the offending file using this command:
mv -- -iunS9U4RFevWpaju6ArIQ.webp iunS9U4RFevWpaju6ArIQ.webp
Here, the -- switch tells the mv command not to look for any more options and only to expect filenames. When I tried enclosing the filename in quotes, I still got problems, even that might have because I was using double quotes instead of single quotes. Another option is to escape the leading hyphen like this:
mv ./-iunS9U4RFevWpaju6ArIQ.webp iunS9U4RFevWpaju6ArIQ.webp
Once the offending file was renamed, I could move the files to their final location. That could have used the -- option too, saving me an extra command, only for my wanting this not to trip me up again. Naturally, working in Finder might have avoided all this as much as not having a file with a leading hyphen in its name, but there would have been nothing to learn then.
Building and installing Microsoft Core Fonts on Fedora 19 with RPM
6th July 2013
While I have a previous posting from 2009 that discusses adding Microsoft's Core Fonts to the then current version of Fedora, it did strike me that I hadn't laid out the series of commands that were used. Instead, I referred to an external and unofficial Fedora FAQ. That's still there, yet I also felt that I was leaving things a little to chance, given how websites can disappear quite suddenly.
Even after next to four years, it still amazes me that you cannot install Microsoft's Core Fonts in Fedora as you would on Ubuntu, Linux Mint or even Debian. Therefore, the following series of steps is as necessary now as it was then.
The first step is to add in a number of precursor applications such as wget for command line file downloading from websites, cabextract for extracting the contents of Windows CAB files, rpmbuild for creating RPM installers and utilities for the XFS file system that chkfontpath needs:
sudo yum -y install rpm-build cabextract ttmkfdir wget xfs
Here, I have gone with terminal commands that use sudo, but you could become the superuser (root) for all of this and there are those who believe you should. The -y switch tells yum to go ahead with prompting you for permission before it does any installations. The next step is to download the Microsoft fonts package with wget:
sudo wget http://corefonts.sourceforge.net/msttcorefonts-2.0-1.spec
Once that is done, you need to install the chkfontpath package because the RPM for the fonts cannot be built without it:
sudo rpm -ivh http://dl.atrpms.net/all/chkfontpath
Once that is in place, you are ready to create the RPM file using this command:
sudo rpmbuild -ba msttcorefonts-2.0-1.spec
After the RPM has been created, it is time to install it:
sudo yum install --nogpgcheck ~/rpmbuild/RPMS/noarch/msttcorefonts-2.0-1.noarch.rpm
When installation has completed, the process is done. Because I used sudo, all of this happened in my own home area, so there was a need for some housekeeping afterwards. If you did it by becoming the root user, then the files would be there instead, and that's the scenario in the online FAQ.
Setting up MySQL on Sabayon Linux
27th September 2012
For quite a while now, I have offline web servers for doing a spot of tweaking and tinkering away from the gaze of web users that visit what I have on there. Therefore, one of the tests that I apply to any prospective main Linux distro is the ability to set up a web server on there. This is more straightforward for some than for others. For Ubuntu and Linux Mint, it is a matter of installing the required software and doing a small bit of configuration. My experience with Sabayon is that it needs a little more effort than this, so I am sharing it here for the installation of MySQL.
The first step is to install the software using the commands that you find below. The first pops the software onto the system while the second completes the set-up. The --basedir option is need with the latter because it won't find things without it. It specifies the base location on the system, and it's /usr in my case.
sudo equo install dev-db/mysql
sudo /usr/bin/mysql_install_db --basedir=/usr
With the above complete, it's time to start the database server and set the password for the root user. That's what the two following commands achieve. Once your root password is set, you can go about creating databases and adding other users using the MySQL command line
sudo /etc/init.d/mysql start
mysqladmin -u root password 'password'
The last step is to set the database server to start every time you start your Sabayon system. The first command adds an entry for MySQL to the default run level so that this happens. The purpose of the second command is to check that this happened before restarting your computer to discover if it really happens. This procedure also is necessary for having an Apache web server behave in the same way, so the commands are worth having and even may have a use for other services on your system. ProFTP is another that comes to mind, for instance.
sudo rc-update add mysql default
sudo rc-update show | grep mysql
Listing hardware information for Linux systems
3rd August 2012
Curiosity about the graphics card on my backup PC caused me to look for ways of getting this information without opening up the machine or searching for a manual. In the end, a solitary command did the job:
sudo lshw
If you are running it as root, the sudo piece can be dropped, but the result is the same. As it happened, it provided me with the information that I needed.