Technology Tales

Adventures & experiences in contemporary technology

When a hard drive is unrecognised by the Linux hddtemp command

15th August 2021

One should not do a new PC build in the middle of a heatwave if you do not want to be concerned about how fast fans are spinning and how hot things are getting. Yet, that is what I did last month after delaying the act for numerous months.

My efforts mean that I have a system built around an AMD Ryzen 9 5950X CPU and a Gigabyte X570 Aorus Pro with 64 GB of memory and things are settling down after the initial upheaval. That also meant some adjustments to the CPU fan profile in the BIOS for quieter running while the the use of Be Quiet! Dark Rock 4 cooler also helps as does a Be Quiet! Silent Wings 3 case fan. All are components from trusted brands though I wonder how much abuse they got during their installation and subsequent running in.

Fan noise is a non-quantitative indicator of heat levels as much as touch so more quantitative means are in order. Aside from using a thermocouple device, there are in-built sensors too. My using Linux Mint means that I have the sensors command from the lm-sensors package for checking on CPU and other temperatures though hddtemp is what you need for checking on the same for hard drives. The latter can be used as follows:

sudo hddtemp /dev/sda /dev/sdb

This has to happen using administrator access and a list of drives needs to be provided because it cannot find them by itself. In my case, I have no mechanical hard drives installed in non-NAS systems and I even got to replacing a 6 TB Western Digital Green disk with an 8 TB SSD but I got the following when I tried checking on things with hddtemp:

WARNING: Drive /dev/sda doesn't seem to have a temperature sensor.
WARNING: This doesn't mean it hasn't got one.
WARNING: If you are sure it has one, please contact me ([email protected]).
WARNING: See --help, --debug and --drivebase options.
/dev/sda: Samsung SSD 870 QVO 8TB: no sensor

The cause of the message for me was that there is no entry for Samsung SSD 870 QVO 8TB in /etc/hddtemp.db so that needed to be added there. Before that could be rectified, I needed to get some additional information using smartmontools and these needed to be installed using the following command:

sudo apt-get install smartmontools

What I needed to do was check the drive’s SMART data output for extra information and that was achieved using the following command:

sudo smartctl /dev/sda -a | grep -i Temp

What this does is to look for the temperature information from smartctl output using the grep command with output from the first being passed to the second through a pipe. This yielded the following:

190 Airflow_Temperature_Cel 0x0032 072 050 000 Old_age Always - 28

The first number in the above (190) is the thermal sensor’s attribute identifier and that was needed in what got added to /etc/hddtemp.db. The following command added the necessary data to the aforementioned file:

echo \"Samsung SSD 870 QVO 8TB\" 190 C \"Samsung SSD 870 QVO 8TB\" | sudo tee -a /etc/hddtemp.db

Here, the output of the echo command was passed to the tee command for adding to the end of the file. In the echo command output, the first part is the name of the drive, the second is the heat sensor identifier, the third is the temperature scale (C for Celsius or F for Fahrenheit) and the last part is the label (it can be anything that you like but I kept it the same as the name). On re-running the hddtemp command, I got output like the following so all was as I needed it to be.

/dev/sda: Samsung SSD 870 QVO 8TB: 28°C

Since then, temperatures may have cooled and the weather become more like what we usually get but I am still keeping an eye on things, especially when the system is put under load using Perl, R, Python or SAS. There may be further modifications such as changing the case or even adding water cooling, not least to have a cooler power supply unit, but nothing is being rushed as I monitor things to my satisfaction.

  • All the views that you find expressed on here in postings and articles are mine alone and not those of any organisation with which I have any association, through work or otherwise. As regards editorial policy, whatever appears here is entirely of my own choice and not that of any other person or organisation.

  • Please note that everything you find here is copyrighted material. The content may be available to read without charge and without advertising but it is not to be reproduced without attribution. As it happens, a number of the images are sourced from stock libraries like iStockPhoto so they certainly are not for abstraction.

  • With regards to any comments left on the site, I expect them to be civil in tone of voice and reserve the right to reject any that are either inappropriate or irrelevant. Comment review is subject to automated processing as well as manual inspection but whatever is said is the sole responsibility of the individual contributor.