Adventures & experiences in contemporary technology
During the past week, I rebooted my system only to find that a number of things no longer worked and my Pi-hole DNS server was among them. Having exhausted other possibilities by testing out things on another machine, I did a status check when I spotted a line like the following in my system logs and went investigating further:
cron[322]: (root) INSECURE MODE (mode 0600 expected) (crontabs/root)
It turned out to be more significant than I had expected because this was why every CRON job was failing and that included the network set up needed by Pi-hole; a script is executed using the @reboot directive to accomplish this and I got Pi-hole working again by manually executing it. The evening before, I did make some changes to file permissions under /var/www but I was not expecting it to affect other parts of /var though that may have something to do with some forgotten heavy-handedness. The cure was to issue a command like the following for execution in a terminal session:
sudo chmod -R 600 /var/spool/cron/crontabs/
Then, CRON itself needed starting since it had not not running at all and executing this command did the needful without restarting the system:
sudo systemctl start cron
That outcome was proved by executing the following command to issue some terminal output that include the welcome text “active (running)” highlighted in green:
sudo systemctl status cron
There was newly updated output from a frequently executing job that checked on web servers for me but this was added confirmation. It was a simple solution to a perplexing situation that led up all sorts of blind alleys before I alighted on the right solution to the problem.
By default, a GNOME Terminal instance does not display a menu bar and that applies not only in GNOME Shell but also on the Cinnamon Desktop environment. In the latter, it is easy enough to display the menu bar using the context menu produced by right clicking in the window before going to Edit > Preferences and ticking the box for Show menubar by default in new terminals in the General section. After closing the Preferences dialogue, every new GNOME Terminal session will show the menu bar.
Unfortunately, it is not so easy in GNOME Shell though the context menu route does allow you to unhide the menu bar on a temporary basis. That is because the requisite tickbox is missing from the Preferences dialogue box displayed after navigating to Edit > Preferences in the menus. To address, you need the execute the following command in a terminal session:
gsettings set org.gnome.Terminal.Legacy.Settings headerbar false
This not only adds the menu bar on a permanent basis but it also adds the missing tickbox, populated as required. GNOME Shell may be minimalist in some ways but making this action harder looks like going a little too far.
After a recent upgrade to Linux Mint Debian Edition 3 in a VirtualBox virtual machine that I had running its predecessor, I began to notice that background images were being loaded with more washed out of faded colours. This happened at startup so selecting another background image worked as intended until the same thing happened to that after a system restart.
This problem is not new and has affected the Cinnamon desktop in the main Linux Mint variant (the one that is based on Ubuntu) and issuing the following command in a terminal session is a suggested solution:
gsettings set org.cinnamon.muffin background-transition fade-in
In my case, that solved the problem and desktop background image display is as it should be since I executed the above. All it took was a change to a system setting.
My web hosting provider offers SSH access that I often use for such things as updating Matomo and Drupal together with more intensive file moving than an FTP session can support. However, I have found in recent months that I no longer can exit cleanly from such sessions using the exit command.
Because this produces a locked terminal session, I was keen to find an alternative to shutting down the terminal application before starting it again. Handily, there is a keyboard shortcut that does just what I need.
It varies a little according to the keyboard that you have. Essentially, it combines the carriage return key with ones for the tilde (~) and period (.) characters. The tilde may need to be produced by the combining the shift and backtick keys on some keyboard layouts but that is not needed on mine. So far, I have found that the <CR>+~+. combination does what I need until SSH sessions start exiting as expected.
BASH is a command-line interpretor that is commonly used by Linux and UNIX operating systems. Chances are that you will find find yourself in a BASH session if you start up a terminal emulator in many of these though there are others like KSH and SSH too.
BASH comes with its own configuration files and one of these is located in your own home directory, .bashrc. Among other things, it can become a place to store command shortcuts or aliases. Here is an example:
alias us=’sudo apt-get update && sudo apt-get upgrade’
Such a definition needs there to be no spaces around the equals sign and the actual command to be declared in single quotes. Doing anything other than this will not work as I have found. Also, there are times when you want to update or add one of these and use it without shutting down a terminal emulator and restarting it.
To reload the .bashrc file to use the updates contained in there, one of the following commands can be issued:
source ~/.bashrc
. ~/.bashrc
Both will read the file and execute its contents so you get those updates made available so you can continue what you are doing. There appears to be a tendency for this kind of thing in the world of Linux and UNIX because it also applies to remounting drives after a change to /etc/fstab and restarting system services like Apache, MySQL or Nginx. The command for the former is below:
sudo mount -a
Often, the means for applying the sorts of in-situ changes that you make are simple ones too and anything that avoids system reboots has to be good since you have less work interruptions.
In a previous posting, I talked about compressing a virtual hard disk for a Windows guest system running in VirtualBox on a Linux system. Since then, I have needed to do the same for a Linux guest following some housekeeping. The Linux distribution used is Debian so the instructions are relevant to that and maybe its derivatives such as Ubuntu, Linux Mint and their kind.
While there are other alternatives like dd, I am going to stick with a utility named zerofree to overwrite the newly freed up disk space with zeroes to aid compression later on in the process for this and the first step is to install it using the following command:
apt-get install zerofree
Once that has been completed, the next step is to unmount the relevant disk partition. Luckily for me, what I needed to compress was an area that I reserved for synchronisation with Dropbox. If it was the root area where the operating system files are kept, a live distro would be needed instead. In any event, the required command takes the following form with the mount point being whatever it is on your system (/home, for instance):
sudo umount [mount point]
With the disk partition unmounted, zerofree can be run by issuing a command that looks like this:
zerofree -v /dev/sdxN
Above, the -v switch tells zerofree to display its progress and a continually updating percentage count tells you how it is going. The /dev/sdxN piece is generic with the x corresponding to the letter assigned to the disk on which the partition resides (a, b, c or whatever) and the N is the partition number (1, 2, 3 or whatever; before GPT, the maximum was 4). Putting all this together, we get an example like /dev/sdb2.
Once, that had completed, the next step is to shut down the VM and execute a command like the following on the host Linux system ([file location/file name] needs to be replaced with whatever applies on your system):
VBoxManage modifyhd [file location/file name].vdi --compact
With the zero filling in place, there was a lot of space released when I tried this. While it would be nice for dynamic virtual disks to reduce in size automatically, I accept that there may be data integrity risks with those so the manual process will suffice for now. It has not been needed that often anyway.
Recently, I had a situation where my the VDI files for my Windows 10 virtual machine expanded in size all of a sudden and I needed to reduce them. My downloading maps for use with RouteBuddy may have been the cause so I moved the ISO installation files onto the underlying Linux Mint drives. With that space, I then set to uncovering how to compact the virtual disk file and the Sysinternals sdelete tool was recommended for clearing unused space. After downloading, I set it to work in a PowerShell session running on the guest operating system from its directory using the following command:
.\sdelete -z [drive letter designation; E: is an example]
From the command prompt, the following should do:
sdelete -z [drive letter designation; E: is an example]
Once, that had completed, I shut down the VM and executed a command like the following from a bash terminal session:
VBoxManage modifyhd [file location/file name].vdi --compact
Where there was space to release, VDI files were reduced in size to return more disk space. More could be done so I will look into the Windows 10 drives to see what else needs to be moved out of them.
Once you end up with Windows overwriting your master boot record (MBR), you have lost the ability to use GRUB. Therefore, it would be handy to get it back if you want to start up Linux again. Though the loss of GRUB from the MBR was a deliberate act of mine, I knew that I’d have to restore GRUB to get Linux working again.So, I have been addressing the situation with a Live DVD for the likes of Ubuntu or Linux Mint. Once one of those had loaded its copy of the distribution, issuing the following command in a terminal session gets things back again:
sudo grub-install --root-directory=/media/0d104aff-ec8c-44c8-b811-92b993823444 /dev/sda
When there were error messages, I tried this one to see if I could get more information:
sudo grub-install --root-directory=/media/0d104aff-ec8c-44c8-b811-92b993823444 /dev/sda --recheck
Also, it is possible to mount a partition on the boot drive and use that in the command to restore GRUB. Here is the required combination:
sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda
Either of these will get GRUB working without a hitch and they are far more snappy than downloading Boot-Repair and using that; I was doing that for a while until a feature on triple booting appeared in an issue of Linux User & Developer that reminded me of the more readily available option. Once, there was a need to manually add an entry for Windows 7 to the GRUB menu too and, with that instated, I was able to dual-boot Ubuntu and Windows using GRUB to select which one was to start for me. Since then, I have been able to dual boot Linux Mint and Windows 8.1 with GRUB finding the latter all by itself so your experiences too may show this variation so it’s worth bearing in mind.
There are times when you might need to drop back to a full screen terminal session from a graphical desktop environment when running Linux. One example that I have encountered is the installation of Nvidia’s own graphics drivers on either Ubuntu or Linux Mint. Another happened to me on Arch Linux when a Cinnamon desktop environment update left me without the ability to open up a terminal window. Then, the full screen command allowed me to add in an alternative terminal emulator and Tech Drive-in’s list came in handy for this. there might have been something to sort on a FreeBSD installation that needed the same treatment. This latter pair happened to me on sessions running within VirtualBox and that has its own needs when it comes to dropping into a full screen command line session and I will come to that later.
When running Linux on a physical PC, the keyboard shortcuts that you are CTRL + ALT + F1 for entering a full screen terminal session and CTRL + ALT + F7 for returning to the graphical desktop again. When you are running a Linux guest in VirtualBox and the host operating system also is Linux, then the aforementioned shortcuts do not work within the virtual machine but instead affect the host. To get the guest operating system to drop into a full screen terminal session, the keyboard shortcut you need is [Host Key] + F1 and the default host key is the right hand CTRL key on your keyboard unless you have assigned to something else as I have. The exit the full screen terminal session and return to the graphical desktop again, the keyboard shortcut is [Host Key] + F7.
All of this works with GNOME and Cinnamon desktop environments running in X sessions and I cannot vouch for anything else unless alternatives like Wayland come my way. Hopefully, this useful functionality applies to those other set-ups too because there are times when a terminal session is needed to recover from a mishap, rare though those thankfully are and they need to be very rare if not non-existent for most users.
With my tendency to apply Linux updates using the command, I was happy to see that something similar was possible in FreeBSD too. The first step is to fire up a terminal session and drop into root using the su command. That needs the root superuser password in order to continue and the next step is to update the local repositories using the following command:
pkg update
After that, it is time download updated packages and install these by issuing this command:
pkg upgrade
Most of the time, that is sufficient but I discovered that there are times when the above fails and additional interventions are needed. What I had uncovered were dependency error messages and I set to looking around the web for remedies to this. One forum question that was similar to what I had met with the suggestion of consulting the file called UPDATING in /usr/ports/. An answer like that looks unhelpful but for the inclusion of advice where extra actions were needed. Also, there is a useful article on updating FreeBSD ports that gives more in the way of background knowledge so you understand the more about what needs doing.
Following both that and the UPDATING file resulted in my taking the following sequence of steps. The first act was to download and initialise the Ports Collection, a set of build instructions.
portsnap fetch extract
The above is a one time only action so future updates are done as follows:
portsnap fetch update
With an up to date Ports Collection in place, it was time to install portman:
pkg install portman
A look through /usr/ports/UPDTAING revealed the commands I needed for updating Python and Perl to address the dependency problem that I was having:
portmaster -o devel/py-setuptools27 devel/py-setuptools
portmaster -r py\*setuptools
With those completed, I re-ran pkg update again and all was well. The extra actions needed to get that result will not get forgotten and I am sharing them on here so I know where they are. If anyone else has use for them, that would be even better.