Adventures & experiences in contemporary technology
Though I use only the command line to do system updates, I still got system restart messages every time a new kernel version was installed. While they can be helpful, I actually prefer to be left to my own devices when it comes to restarting a system and I may have a something running at the time that I do not wish to interrupt.
In Ubuntu GNOME 13.10 and before, there was no sign of these messages so I decided to see if I could go nag free again. The responsible application is called Update Notifier and I tried seeing if I could remove it but that act has a major impact of the system so it was not a useful way to go.
As it happens, it is an application that starts up automatically at computer boot time but there was no sign of an entry for it in the Startup Applications Preferences screen (started using from the command line using gnome-session-properties). The for this is that there is flag called NoDisplay in the relevant autostart shortcut in /etc/xdg/autostart/ that stops it appearing in the aforementioned settings screen when set to true. The trick then is to set it to false and the following command (broken over two lines for sake of display and quotes could need replacing when you issue the command too) does the trick for all such hidden start-up applications:
sudo sed -i ‘s/NoDisplay=true/NoDisplay=false/g’
/etc/xdg/autostart/*.desktop
What the above does is that sed goes into every file and changes NoDisplay=true to NoDisplay=false in each file with the desktop extension. When that has completed, there are more entries in Startup Applications Preferences and Update Notifier can be deselected in order to stop it starting. Removing the relevant .desktop file would be a more permanent change but this one will do me, especially since no more of those pesky restart messages appear anymore. My regularity when it came to system updates meant that the update messages never appeared anyway and I tend to shut down my system at the end of every day so the updates will be picked up too so all should be well.
The post editor that I have been using on my WordPress-powered outdoors blog has not been TinyMCE but FCKEditor. My use of that editor has meant that WordPress’ autosave and word counting features have not been available to me but that was my choice, as strange as it will sound to some. However, there have been times when I have missed the autosaving functionality and lost work. Since FCKEditor has been replaced by CKEditor, there are plugins available for adding that editor to WordPress’ administration interface. Recently, I got to replacing the old FCKEditor plugin with a newer CKEditor one and that has gained me post or page autosaving. The more cosmetic word counting feature is not active until a draft is manually saved but I can live with that. Other than that, the interface remains familiar with all (X)HTML tags on show in the source code view without any being hidden away from view like in WordPress’ implementation of TinyMCE. That isn’t to see that WordPress is doing something wrong but just that there are alternative way of doing things that are equally valid. After all, why would there be choices if there only ever was one right way to do anything?
Like any WordPress plugins, those replacing the default content editor in WordPress can be vulnerable to changes in the publishing platform and there is one of those in the pipeline for 3.2: a minimalist post/page editor that is billed as being non-distracting. That planned new feature is drawing inspiration from the likes of QuietWrite, where you can write content and transfer it over to WordPress or leave it where it was written. Even with bigger changes like this, my experience never has been that design decisions made for new WordPress releases have restricted to any great extent how I use the thing. That’s not to say that my usage hasn’t changed over time but I have felt that any decisions were mine to make and not all made for me. In that light, I can foresee CKEditor continuing to work on WordPress 3.2 but I’ll be doing some testing ahead of time to be sure that is the case.
There are times when I feel the need to share some snippets with a longer lifespan than a tweet. This is a place for those and some yet may even turn into longer articles themselves. That already has happened for one of them, so there is something of a digital scrapbook in operation here.
13:08 January 8, 2024
Now that ownCloud has been acquired by Kiteworks, there is some uncertainty about what happens next. So far, there is an offer for ownCloud and Nextcloud users to move to Kiteworks’ proprietary platform. Nextcloud itself has been busy making use of the uncertainty to promote their own product line.
19:15 November 19, 2023
The open-source section of the website got a lot of tweaking in the last few weeks. The recipient of the attention was the operating system subsection. That got a full reorganisation with all the listings seeing new entries too. The desktop software also got a bit of attention, and other areas could get altered yet.
11:35 January 20, 2023
Recently, I have been having trouble with Nvidia drivers following a kernel update in Linux Mint (21.1 is the version that I am using). The kernel version has been rolled back from 5.19.x to 5.15.x, and I installed an old AMD graphics card as well. Things still are not perfect, though, so I will be looking out for a way to make things smoother. For now, all is good enough for the moment.
10:30 February 12, 2022
Google Analytics appears to be losing favour in the EU, if Matomo is to be believed. First, Austria outlawed its usage and no France follows suit. This naturally suits Matomo, a self-hosted open-source alternative for collecting website metrics, so it should not be any surprise that they are forthcoming with these details.
16:20 October 9, 2021
Here is the sequence of commands to use when upgrading from OpenMediaVault 4.x to 5.x. All need to be executed with elevated access privileges:
wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/upgrade4to5 | sudo bash
reboot
Once your system has restarted and you have logged in again, then you execute these:
apt-get purge openmediavault-omvextrasorg resolvconf
wget -O - https://github.com/OpenMediaVault-Plugin-Developers/packages/raw/master/install | bash
apt-get update
apt-get dist-upgrade
omv-salt deploy run nginx
omv-salt deploy run phpfpm
apt-get install usrmerge
omv-confdbadm migrate conf 5.0.0
15:19 October 9, 2021
Here are some North American online emporia fro buying computers, their components or peripherals:
09:06 September 24, 2021
Here are boilerplate commands for banning and unbanning IP addresses using Fail2ban:
fail2ban-client set <JAIL> banip <IP>
fail2ban-client set <JAIL> unbanip <IP>
13:09 July 27, 2020
If you ever need to install Linux kernel headers on an openSUSE instance in order to install VirtualBox Guest Additions, the following command should be executed in order to do the needful:
sudo zypper in kernel-source
10:37 February 5, 2017
Here is a possible way of resetting the CSS definition for a HTML element, class or ID:
#reset-this-parent {
all: initial;
* {
all: unset;
}
}
Browser support for the above may vary though.
10:39 November 23, 2016
After seeing messages like “The authenticity of host ‘hostname’ can’t be established” during ssh connections, I decided to investigate more and came up with the following solution:
sudo chown -v $USER ~/.ssh/known_hosts
My known_hosts file had gained root ownership so i could not write to it so changing the ownership to that of my own user account sorted the problem. An alternative could be to change the group assignment using chgrp and setting permissions using chmod but what I did sufficed for my needs.
06:30 November 23, 2016
When I ran into trouble with accessing my own websites using my broadband, I found that the solution was to change DNS Lookup Service to what Google offers. This was done on the router side and the IP addresses used were 8.8.8.8 and 8.8.8.4.
22:33 June 4, 2016
Here’s a way to convert DNG files to JPEG ones:
find -type f | grep DNG | parallel mogrify -format jpg {}
10:51 September 16, 2015
Here is a way to recursively delete folders and their contents in PowerShell:
Remove-Item .\foldertodelete -Force -Recurse
The Force switch silences any messages that otherwise would appear and the Recurse switch is what gets directories removed.
23:38 August 18, 2015
Thomson Reuters is changing over Open Calais at the end of August.
11:05 July 29, 2015
Motorola now selling phones direct to the public through its own store. Customisation options are available for more expensive models like Moto X and Nexus 6 too.
10:18 April 12, 2015
Devuan (pronounced like dev-one) is a fork of Debian that does not use systemd as Debian, like so many other distros, is doing. Part of the name must come from a collective calling itself Veteran UNIX Admin (VUA). There is no actual release just but one is intended for around the same time as Debian 8.0 gets released and donations are being solicted via the website.
18:51 February 20, 2015
Here is a handy way to get PowerShell to show files larger than a certain size:
get-childitem | where-object {$_.length -gt 10000}
|ft fullname, length -auto
19:40 December 1, 2014
When a VirtualBox upgrade broke the networking on a Windows 8.1, it was time to look at System Restore to see what it would do. It reverted version 4.3.20 to 4.3.15 and the network disconnection stopped. For now, I will remain with that older version after the misstep with the latest one. Sometimes it is best to stick with what is known to work.
20:38 October 30, 2014
With my deciding to try doing about my waistline during the summer (a bike got put on a trainer and around 30 minutes is spent on it most evenings while I also catch up some reading; now, I feel fitter and incursions into the countryside have an added air of confidence about them), an interest in fitness monitors has developed and the Pulse Ox from Withings has taken my eye due its being price of around £100. That makes it less than alternatives and it isn’t the only health gadget that the company does either with there being a blood pressure monitor in its range too. The Pulse Ox monitors such things as heart rate, activity such as walking and running, sleeping and weight too. It should work with your smartphone as well, which is a bonus. It is one of several like it with Samsung and Apple going in for phone apps and Microsoft releasing their Band device as well. This appears to be a growing area where I never expected to see mainstream technology companies having a role for themselves.
12:44 October 30, 2014
Ergotech now have useful desktop stands for tablet computers. There is one for a full size iPad and another for any other type of tablet. A standalone one on wheels also is available though I cannot see myself ever needing such an item.
20:24 October 20, 2014
Here are some more specialist information sources with search facilities:
18:53 October 7, 2014
Here is the test for the “Shellshock” vulnerability in the bash shell:
env x='() { :;}; echo vulnerable’ bash -c “echo this is a test”
It should not return the following:
vulnerable
this is a test
This would be acceptable:
bash: warning: x: ignoring function definition attempt
bash: error importing function definition for `x’
this is a test
Also, just having this might be fine too:
this is a test
In case you need it, Redhat has more information on the bug that caused scare stories everywhere. Now, it is over to system administrators everywhere to do their bit now that bash has been patched.
21:36 August 24, 2014
Sometimes you need to create more than one directory level in a hierarchy at once and mkdir has the -p option for this purpose. That gets it to create any missing levels in a folder path and avoids warnings that would be issued otherwise.
16:18 August 21, 2014
Debian 8 is under development and has its first beta ready for download. XFCE is now the default desktop environment though it remains possible to install GNOME and GNOME Shell too. In fact, I successfully have given that a go in a VirtualBox installation and will keeping an eye on development so long as no system meltdowns occur. The version of the X Window system already is incompatible with VirtualBox 4.3.14 so we need to await a new version of the virtualisation software before we get access to advanced functions like full window desktop expansion. What we have at the moment works well enough to keep eye on development so we can wait for that full support.
18:31 August 6, 2014
Perfect Resize from onOne Software caught my eye for scaling up images after seeing it mentioned in a Outdoor Photography review of Avanquest PhotoZoom Professional. With a library of 6″ x 4″ prints, I am limited in how large I can make scanned images without they looking blurred and pixelated so that’s why my interest was aroused. There may be a free moment spent seeing what it might do in that situation yet.
16:24 August 2, 2014
Nvidia has a useful page on the difference between DVI-D and DVI-I. It came in handy when transitioning from VGA to DVI on my home PC’s. That made what appears on my Iiyama screen much sharper and allowed me to rid myself of a suspect VGA cable too.
21:42 June 11, 2014
Here are some interesting articles about EFI and UEFI that I uncovered during a recent episode of setting up dual booting of Windows 8.1 and Linux Mint 17 on a PC with EFI:
UEFI Dual-Boot -- Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)
11:53 May 3, 2014
In the U.K., BT allows you to divert your phone calls for a fee and I have made good use of it over the past year. The service is called Call Diversion and Eircom, Ireland’s counterpart to BT, offers Call Forwarding in Éire. Both are handy because redirecting a call to a mobile phone means that you know you are not missing any calls and that there is nothing lurking on an answering machine when you do get to your home or office. Landline telephony may seem less exciting these days than other forms of communication yet it still has its place and I would not get any nasty surprises along the path of life either. If only I had started doing this kind of thing earlier than I did…
20:12 April 4, 2014
Here’s a useful article about the ever useful locate command. Whether it is FreeBSD or Ubuntu that you are running, this article has a use and that especially when the locate database needs updating with the updatedb command.
20:54 March 12, 2014
A recent website redesign was well helped by modern.IE‘s collection of virtual machine appliances containing different versions of Windows and Internet Explorer. Depending on the host operating system that you are using, you have different options. For Linux, it is VirtualBox only while Windows gains VMware and Virtual PC too. It is a matter of just picking out what suits your situation from dropdown lists.
The first one that I picked was Vista with IE 7 and it was an interface that I had not seen for a while. For all the criticism, the operating system did work well though I wonder if it arrived before the computer hardware that it really needed in order to run smoothly. The dark theme cannot have helped its cause either, especially when compared with the much brighter Windows 7 or Windows 8.x. A Windows XP appliance with IE 6 was grabbed before it gets yanked and support for the elderly OS does finish in April. IE 6 probably is on its last legs so I probably can ignore it now but IE 7 might live longer yet. Window 7 appliances with IE 9 and IE 10 also were downloaded and confirmed that all was well in recent versions of IE when it came to the website. The Vista virtual machine allowed me to ensure that all looks acceptable on IE 7 too. The VM’s themselves contain evaluation versions of enterprise variants of Windows and have a limited lifespan though it is little trouble to reimport an appliance again to rest the clock if so required. In most cases, you extend the evaluation periods too through re-arming and there only are so many times that you can do that anyway. With Windows 8.x, it isn’t even a possibility anyway.
22:05 March 9, 2014
Today, I found an interesting article on CSS media queries and put it to some use for a website redesign that has been keeping me busy over the weekend. Twitter’s Bootstrap came in handy for this too. Now, it’s on to ridding the new design of any rough edges that remain in there. That can be an ongoing task and the site is here if you fancy a look to see what my efforts have produced.
16:20 February 26, 2014
Adding a new Zalman ZM450-GS power supply did little to sort the buzzing in my speakers but it has made the PC where it was installed so much quieter; a much larger fan spinning slower helps while still moving the required amount of air. It is 450W too and I am wondering if my main PC would benefit from a similar upgrade. That may be quieter than the other one was but the case was not a deluxe model so the change should do no harm. As for the speakers, moving them was the only way to get rid of the buzzing. Looking back on this now, it seems that one of them was far too close to a PC.
20:33 February 15, 2014
Currently, the spare PC appears to be causing buzzing on my main PC speakers and with my landline telephone when it is placed right under these. Removing it helps to cut it down but I fancy having a better fix and am wondering if a new power supply might help. Also, I am wondering if there are other sources too. In the meantime, I would like to share an article on the subject that I recently found: Kill Studio Hum and Buzz at the Source.
22:14 February 12, 2014
Applying latest set of updates to LMDE worked to get to Update 8 worked smoothly unlike some predecessors. This brought the latest version of Cinnamon so GNOME now is redundant. It will be interesting to see where things go next.
16:24 February 8, 2014
During the week, I discovered that Twitter is not a benign place to go ruminating. A sharp riposte in an unnecessary tone of voice was enough to bring on a sense of extra caution. Wherever you get humanity, you are likely to encounter and one had a go at me so some thoughts are going to be kept away from there from this point forward. Sometimes, you own website is a far better place to go ponder happenings in the world around you. After all, an ugly comment can be deleted and a rogue IP address blocked if things need to go that far. Of course. more civility would be best. Polite correction is the best course whenever it is warranted since we all are human and no one is beyond making mistakes.
16:15 February 8, 2014
On my outdoors website, I have been using a PHP script from Detect Mobile Browsers but this does not distinguish between Android running on a tablet and that running on a phone. Therefore, I have turned to another source of such scripting and that is working better so far. In fact, this offers more than just PHP but also Python, JavaScript and other scripting languages along with configuration files for web servers too. Apache, Nginx and IIS all have something for them. The logic essentially is based on Perl regular expression matching of user agent strings, not an infallible means but good enough for me along with a smattering of responsive design.
14:30 February 1, 2014
For anyone lost when faced with the changes Microsoft brought in with the launch of Windows 8 and largely retained in Windows 8.1, TechRadar has a useful article: 62 Windows 8 tips, tricks and secrets. What will prove especially interesting is where Microsoft goes next when many of their customers prefer the Windows 7 interface and are sticking with the elderly Windows XP. You only can get so far by telling your customers that they are wrong all of the time and the is competition in the form of Apple’s OS X and Google’s Chrome now.
14:23 February 1, 2014
TechRadar has a round-up of Best free photo editing software: 10 top image editors you should try. Usual options like GIMP, Paint.Net and IrfanView get a mention along with other less well known ones. Interestingly, Google’s Picasa is excluded from the list but that might be because it largely is an image file management tool even if it has some image editing capabilities too.
21:28 January 27, 2014
Late last week, I found out about the image file sorting tool PhotoSift via an article on the software. It looks interesting though I have yet to try it.
17:52 January 27, 2014
Here are some interesting reviews from TechRadar:
Best compact system camera 2014: the top models reviewed
Best tripod and camera support: 13 tested
The tripod heads review really caught my eye more than the others. After all, 2013 was the year that I got a CSC and a Manfrotto tripod has sat reproachingly in the corner far more often than it should.
19:41 January 16, 2014
Today, I spotted two interesting articles to which I want to retain links on here:
Managing the future of complex business and IT landscapes
Send large files to clients with these 8 free tools
Both of these ring bells for me for different reasons. The first is a reminder of a slow and painful system project with which I was involved and of an ineffective IT support service that pained us at the time. The second is ever present in my current job with its need to send data and output files to clients as well as receiving specifications from them.
19:36 January 4, 2014
In recent weeks, I have been having trouble with the onboard network controller on a spare PC that I have at home. It connects to the network fine for a few minutes and then struggles. Making use of an old PCI ethernet card that I had from another machine solved the problem. Does anyone know of issues with ASRock motherboards and onboard network ports at all? It isn’t something that I have seen before and this motherboard never had good networking capability as long as I have had it.
19:33 January 4, 2014
After Christmas, I took delivery of an HTC One mini mobile phone that I got free as part of a contract renewal with O2. It also is known as the M4 and I have been getting used to it since I got it. A lot is familiar and there are some little differences too. Some of these leave me asking why what worked well before got changed to something that is less smooth. Of course, that can be the course of things and it applies to buying a new car as much as getting a phone upgrade. All in all, the phone works well and battery life appears much improved over the HTC Desire S so far, never a bad thing to notice.
19:25 January 4, 2014
This morning, the hosting provider for this website had an outage that lasted over three hours. The provider was Fasthosts and the cause was a power failure. They usually are good so this thankfully does not happen too often. However, we have been getting a lot of stormy weather crossing Britain and Ireland this winter so I suspect that there should be little in the way of surprise when something like this happens. Weather is not due to settle during this month so there may be more power failures, hopefully elsewhere, before things settle down again.
17:20 January 3, 2014
On one WordPress website that I have, the refresh rate for RSS widgets wasn’t the quickest and the remedy was to add this line into the themes functions.php file:
add_filter( ‘wp_feed_cache_transient_lifetime’, create_function(‘$a’, ‘return 600;’) );
It creates a custom function that is attached to the widget and the refresh time is set to 600 seconds or 10 minutes. So far, this seems to be doing what I needed.
17:56 December 19, 2013
What I didn’t realise is that TRIM currently is not enabled in Ubuntu by default. That is set to change in Ubuntu 14.04 and here is some advice on the matter until then.
20:41 December 14, 2013
This weekend, I had visions of needing a new hard drive when all files on one in my main home PC (runs Ubuntu GNOME 13.10 64-bit) went read only. The cure was to re-seat the SATA cables and all was well again. Sometimes, inexpensive remedies are best and I need not to forget this one.
20:54 October 29, 2013
Here are two interesting articles that I spotted: the first is on new features in GNOME 3.10 and the second about getting DRM-protected Flash media playing on Ubuntu 13.10. For now, I am sticking with Ubuntu GNOME 13.04 in spite of a pop-up dialogue encouraging an upgrade to 13.10; the potential for even a little disruption is something that I am delaying for now.
20:34 October 16, 2013
While editing a file in Nano on an virtual Arch Linux web server that I have, I noticed that a file had DOS newline characters instead of UNIX ones so conversion using the dos2unix command was in order. There is more on this to be found on nixCraft and there are other options such as sed described in there too.
21:51 September 7, 2013
Following a look at Webmin, I have to say that it seems a worthy tool for remote management of servers. My trial so far has been on my Ubuntu virtual web server and it works on port 10000 without interfering with the operation of the actual web server. Being able to run system updates and deletion of MySQL databases without resorting to the command will seem a bonus for some. There’s more to it than these though and I have seen the possibility of managing virtual servers located within a real being mooted. It was an issue of Linux User & Developer than inspired me so my Linux magazine reading is seeing its uses.
20:30 September 4, 2013
Here are some interesting articles for anyone thinking about software development and its realities:
The care and feeding of software engineers (or, why engineers are grumpy)
Being an introvert as I am, this article really is something to which I can relate. Whenever I cannot get the space for undisturbed work, it takes from how I enjoy my job.
How designers and engineers can play nice (and still run with scissors)
We all have to work cross-functionally so you cannot have it all your own way…
Six reasons why the NHS National Programme for IT failed
Having been involved in system design, development and implementation myself, I have something to share that fits into the same topic area. Too many cooks can spoil a broth.
Queensland Government Bans IBM from IT Contracts
My past experiences of IBM have not been good and it wasn’t just where I worked either so this is not exactly a surprise. Service organisations need to ensure that they are sufficient responsive and flexible with empowered and enthusiastic staff who do the needful.
23:09 August 11, 2013
Vagrant and Puppet look like very interesting tools for working with virtual machines. They work with VirtualBox or VMware’s Fusion and Workstation so there’s a choice of virtualisation tool.
20:52 April 18, 2013
Crash reports have been appearing after logging into an Ubuntu session for /usr/share/hplip/config_usb_printer.py and it repeating has been reinstalling HPLIP software for my HP LaserJet 1018 printer too. Leaving the printer off until I need it would be one solution and saves some electricity too but it is best to try to sort an issue when you keep getting it. The first step was to download the latest HP software and install it. That wasn’t a complete solution so I altered the latest send_message function call in /usr/share/hplip/config_usb_printer.py from the following:
send_message( device_uri, printer_name, EVENT_DIAGNOSE_PRINTQUEUE, username, 0,”)
to:
send_message( device_uri, printer_name, EVENT_DIAGNOSE_PRINTQUEUE, ”, 0,”)
So far that alteration appears to have addressed the problem but I’ll be keeping an eye on things anyway. If you’re wondering, the inspiration came from a bug discussion on Launchpad and it was the queue clearing section of the Python script that I went and edited.
20:40 April 16, 2013
Recently, I have been having bother with WordPress Jetpack comment form submission. This was caused by the Bad Behaviour plugin and allowing cross site form submission sorted the problem. The setting to change is in Settings > Bad Behaviour on the Dashboard.
17:31 March 16, 2013
Here’s a quick way to make Faenza and Faience icons available to Ubuntu and maybe Linux Mint too:
sudo add-apt-repository ppa:tiheum/equinox
sudo apt-get update && sudo apt-get install faenza-icon-theme faience-*
20:53 February 19, 2013
During a look at a Fedora 18 Live DVD, I found a user name was needed to get to the desktop and root did the trick for me. What I didn’t notice was an install to hard drive option for the GNOME variant that I tried. Maybe it was hidden on the desktop and not displayed. If so, it looks like an oversight.
16:02 February 14, 2013
Here’s the way to find the version of PROC CDISC that came with the version of SAS that you are using:
proc cdisc version;
run;
14:00 February 14, 2013
Here’s robustness principal for software design that otherwise is known as Postel’s Law after TCP pioneer Jon Postel:
Be conservative in what you do, be liberal in what you accept from others
08:10 February 14, 2013
Here’s a command for removal of orphaned packages in Arch Linux and its derivatives (CinnArch and ArchBang come to mind but there may be others):
sudo pacman -Rns $(pacman -Qqtd)
15:11 January 26, 2013
Cinnarch looks very interesting. It’s based on Arch Linux so it’s a rolling distro but has Cinnamon as its desktop environment. Currently, it’s still in beta but I am tempted to give it a go in a virtual machine.
20:55 December 15, 2012
Having decided that my ever sluggish system needed a fresh operating system installation, I set to trying to get on Linux Mint 14. However, not remembering that the disk and not the partition needs specifying for GRUB installation cost me some time. Later, adding on GNOME Shell resulted in a system conflict between MDM and GDM so I now am running Ubuntu GNOME Remix instead. All feels fresher so far though a spot bother was had with the lock screen that caused me to turn off the feature. VMware Player installed without any of the trickery needed to get in its forbear and runs without a hitch so far too. Other bits and pieces need instating yet but the basis of a refreshed computing platform is in place now.
20:56 November 19, 2012
A look at Linux Mint 14 64-bit release candidate in a VirtualBox virtual machine confronted me with irritating mouse pointer behaviour. The pointer constantly darts to the left when you need it not to do that and it seriously affects usability. The final version will be awaited to see if there is an improvement because it’s not very usable as things stand. GNOME Shell can be installed in working order after a spot of fiddling. Installing the software from the Software Store doesn’t add gnome-session as well so the command line alternative remains best:
sudo apt-get install gnome-shell && sudo apt-get install gnome-session
These two really need packaging together as dependencies. Cinnamon is looking as nice as ever and in need of a plug-in that makes virtual desktops behave as they do in GNOME, even if that’s a minority interest now.
12:07 September 30, 2012
Here are commands for adding Cinnamon to Ubuntu:
sudo add-apt-repository ppa:gwendal-lebihan-dev/cinnamon-stable
sudo apt-get update
sudo apt-get install cinnamon
14:39 September 29, 2012
Had a look at GNOME 3.6 in Ubuntu GNOME Remix 12.10 Beta 1 release. Not all extensions are supported yet but GNOME 3.6 only launched officially yesterday anyway. Will take a little while for those extension developers to catch up with it. No hurry in moving from GNOME 3.4 until they do so.
20:24 September 22, 2012
Picked up Netgear ethernet switcher at PC World today. Working without a hitch so far. Some network reorganisation may follow suit.
20:14 September 22, 2012
Initially, I needed to use the command “modprobe vboxdrv” to get VirtualBox going on Sabayon 10. However, there seems to be a better remedy: adding the line ‘modules=”vboxdrv vboxnetflt vboxnetadp”‘ (removing the outer single quotes, by the way) to /etc/conf.d/modules and restarting the system. That seems to have done the trick though I wonder it wasn’t added for me automatically.
13:08 September 22, 2012
Until recently, I hadn’t realised that most if not all SSD’s come in 2.5″ form factor. An extra bracket is needed for installing into 3.5″ drive bays. While tempting, this remains a nice to have upgrade for me.
20:02 September 21, 2012
Found out why my proftpd daemon wasn’t working on Linux Mint. Needed to set it as standalone and not inetd operation. It’s the ServerType setting in /etc/proftpd/proftpd.conf.
21:53 September 18, 2012
Given the site a new appearance. The cause was getting microblogging going on this page. Clashes with zeeDisplay theme and Twitter Tools made for replacements that now power what you see here. Jetpack plugin added too. All looking good to my eyes so far. More tinkering may happen yet.
21:36 September 15, 2012
Here are a few places where you will find Linux version information stored: /etc/issue, /etc/issue.net, /etc/lsb-release.
17:30 September 15, 2012
Desktop swapping can be done in Ubuntu and here’s the command for Xubuntu:
sudo apt-get install xubuntu-desktop
17:22 September 15, 2012
Here’s a set of commands that I once used to get GNOME Shell going for a Sabayon 9 installation in a VirtualBox virtual machine:
su
equo install --ask linux-sources
cd /run/media/john/VBOXADDITIONS_4.1.16_78094
./VBoxLinuxAdditions.run
mv /usr/libexec/gnome-session-check-accelerated-helper /usr/libexec/gnome-session-check-accelerated-helper.bak
ln -s /bin/true /usr/libexec/gnome-session-check-accelerated-helper
Hope they have a use though VirtualBox has gone through a few versions since I discovered that these had the desired effect though the login screen behaved a little oddly. Otherwise, everything worked as it should.
14:16 September 15, 2012
Pondering purchase of NAS. QNAP TS-412 looking promising but need to think about my home networking set up first. Might need an ethernet switch but plan to look into it more first, especially with uplink capability needed.
14:11 September 15, 2012
Appearance of Sabayon 10 caused a bit of disturbance to my Sabayon installation that needed installation from a DVD to resolve. Tried GRUB repairs before the non-loading of an Nvidia kernel module caused bother. Went for old fashioned approach for sake of saving a little troubleshooting time.
13:52 September 15, 2012
This has been added using the Live Blogging plugin and it’s good for pages too, unlike Automattic’s own Liveblog plugin. Maybe they’ll add that sort of functionality in time.
There are times when I just need to share some links outside the fleeting environment of Twitter, and this is where they might appear. The practice is very much in the spirit of the original weblog idea when it was about link sharing and not about writing down one’s thoughts as it subsequently became before sharing of photos, videos and other multimedia content became a mainstay of (legal) sharing for some people.
17:34 January 21, 2024
17:32 January 21, 2024
17:33 January 16, 2024
17:59 January 15, 2024
17:58 January 15, 2024
17:58 January 15, 2024
13:23 January 15, 2024
18:44 January 14, 2024
22:33 January 8, 2024
22:20 January 6, 2024
13:32 January 5, 2024
21:47 December 23, 2023
How to stop websites from sending Bitdefender Safepay notifications
18:19 December 18, 2023
18:18 December 18, 2023
16:33 December 18, 2023
22:26 November 19, 2023
19:02 November 10, 2023
19:14 November 9, 2023
23:04 October 20, 2023
20:26 July 31, 2023
So you want to build your own open source ChatGPT-style chatbot…
16:42 July 31, 2023
16:37 July 31, 2023
16:33 July 31, 2023
19:52 July 4, 2023
09:32 May 12, 2023
16:30 March 17, 2023
13:42 March 15, 2023
19:35 March 14, 2023
13:15 March 10, 2023
Set Up SSH Two-Factor Authentication (2FA) on Debian 11 Server
13:51 March 9, 2023
10:25 March 6, 2023
WordPress 4.6 Admin Font Change Fix – How To Restore Open Sans Font?
10:24 March 6, 2023
20:14 February 24, 2023
20:11 February 24, 2023
14:35 February 24, 2023
01:31 February 20, 2023
01:31 February 20, 2023
Why is the Filter Gallery Greyed Out in Photoshop and How to Fix it
10:18 February 7, 2023
11:00 January 27, 2023
How to take a full-page screenshot with a hidden Chrome shortcut
14:53 January 23, 2023
15:52 January 19, 2023
10:15 January 12, 2023
10:12 January 12, 2023
18:08 January 10, 2023
18:08 January 10, 2023
18:07 January 10, 2023
18:06 January 10, 2023
17:12 January 10, 2023
Proton Mail Bridge Microsoft Outlook for Windows 2019 setup guide
08:07 January 4, 2023
22:39 December 4, 2022
10:50 December 2, 2022
21:48 November 22, 2022
10:00 November 21, 2022
09:59 November 21, 2022
14:29 November 18, 2022
14:08 November 14, 2022
15:17 November 1, 2022
19:51 October 29, 2022
How to Upload or Download Files/Directories Using sFTP in Linux
19:50 October 29, 2022
19:49 October 29, 2022
17:00 October 27, 2022
[FIX] Memory integrity due to Incompatible drivers cannot be enabled in Windows 11
19:20 October 25, 2022
How can I redirect and rewrite my URLs with a .htaccess file?
13:49 October 25, 2022
How to change the maximum number of IMAP connections in Mozilla Thunderbird
20:49 October 23, 2022
18:06 October 23, 2022
13:46 October 23, 2022
11:49 October 22, 2022
11:49 October 22, 2022
Secure Tutanota desktop clients for Linux, Windows and Mac OS
11:48 October 22, 2022
11:47 October 22, 2022
11:47 October 22, 2022
How to Access the Hidden Symbols on Your Android Phone’s Keyboard
08:43 October 22, 2022
10:31 October 13, 2022
Enable or Disable Automatic Sign-in at Startup in Windows 11
10:25 October 13, 2022
13:25 October 12, 2022
12:03 October 12, 2022
11:52 October 12, 2022
4 Ways to Embed User Privacy & Data Security in Your Business
11:48 October 12, 2022
11:47 October 12, 2022
11:47 October 12, 2022
11:47 October 12, 2022
11:46 October 12, 2022
11:45 October 12, 2022
11:45 October 12, 2022
11:44 October 12, 2022
11:44 October 12, 2022
11:43 October 12, 2022
11:42 October 12, 2022
11:40 October 12, 2022
11:40 October 12, 2022
11:39 October 12, 2022
11:38 October 12, 2022
11:37 October 12, 2022
11:37 October 12, 2022
11:36 October 12, 2022
11:33 October 12, 2022
09:46 October 12, 2022
09:30 October 12, 2022
Introducing Improvements to the Opt-Out Form Feature in Matomo
14:14 October 11, 2022
17:51 October 3, 2022
12:06 September 29, 2022
15:01 September 28, 2022
10:58 September 15, 2022
How to automatically decline meeting invites from specific people in Outlook
10:46 August 25, 2022
16:06 August 20, 2022
15:34 July 29, 2022
15:32 July 29, 2022
15:32 July 29, 2022
12:02 July 28, 2022
12:01 July 28, 2022
10:57 July 27, 2022
10:57 July 27, 2022
10:56 July 27, 2022
10:55 July 27, 2022
10:55 July 27, 2022
18:39 July 26, 2022
18:38 July 26, 2022
18:37 July 26, 2022
18:36 July 26, 2022
18:35 July 26, 2022
18:35 July 26, 2022
18:34 July 26, 2022
18:34 July 26, 2022
09:16 July 25, 2022
19:03 July 22, 2022
What is a Cloud-Native Application Protection Platform (CNAPP)?
17:43 July 21, 2022
17:40 July 21, 2022
14:20 July 21, 2022
17:47 July 20, 2022
How to set rsync speed limit from eating all bandwidth with ‐‐bwlimit option
17:47 July 20, 2022
09:20 July 14, 2022
09:03 July 11, 2022
09:05 July 1, 2022
09:00 July 1, 2022
14:05 June 29, 2022
14:05 June 29, 2022
11:05 June 29, 2022
16:43 June 26, 2022
13:26 June 26, 2022
How to Reduce Eric Jones Spam (and all the other Contact Form Spam)
12:43 June 26, 2022
12:42 June 26, 2022
12:41 June 26, 2022
12:40 June 26, 2022
19:36 June 25, 2022
17:13 June 24, 2022
15:32 June 20, 2022
14:13 June 14, 2022
Handling False Positives with the OWASP ModSecurity Core Rule Set
11:10 June 14, 2022
How To Use a Multimeter to Measure Voltage, Current and More
13:11 May 26, 2022
13:10 May 26, 2022
15:36 May 9, 2022
14:53 April 27, 2022
19:28 March 27, 2022
19:27 March 27, 2022
20:25 March 17, 2022
15:22 March 16, 2022
09:10 February 26, 2022
Show Amount Of Posts, Pages, Categories, Tags, Comments For WordPress Themes
09:09 February 26, 2022
How to Develop a WordPress Theme from Scratch – Beginners Guide
09:08 February 26, 2022
Count the number of posts in the custom post type in WordPress
09:41 February 23, 2022
09:41 February 23, 2022
20:59 February 22, 2022
18:54 February 22, 2022
10:19 February 22, 2022
21:24 February 21, 2022
21:24 February 21, 2022
18:52 February 18, 2022
18:51 February 18, 2022
18:51 February 18, 2022
18:50 February 18, 2022
How To Configure Apache HTTP with MPM Event and PHP-FPM on Ubuntu 18.04
16:45 February 18, 2022
Protecting WordPress with Open Source Web Application Firewall ModSecurity
14:35 February 16, 2022
14:35 February 16, 2022
09:32 February 16, 2022
09:26 February 15, 2022
18:56 February 14, 2022
How To Configure Nginx to Use Custom Error Pages on Ubuntu 14.04
09:24 February 14, 2022
19:42 February 13, 2022
19:42 February 13, 2022
19:41 February 13, 2022
13:02 February 13, 2022
08:55 February 13, 2022
08:54 February 13, 2022
08:53 February 13, 2022
How To Install Linux, Nginx, MySQL, PHP (LEMP Stack) on Ubuntu 18.04
09:03 February 11, 2022
09:03 February 11, 2022
09:02 February 9, 2022
20:35 February 8, 2022
20:34 February 8, 2022
20:33 February 8, 2022
10:02 February 8, 2022
09:59 February 8, 2022
09:57 February 8, 2022
09:57 February 8, 2022
09:56 February 8, 2022
09:55 February 8, 2022
09:54 February 8, 2022
09:54 February 8, 2022
09:53 February 8, 2022
Talkyard with Nginx as a reverse proxy and Letsencrypt for HTTPS
09:53 February 8, 2022
09:52 February 8, 2022
To Fix The Docker and UFW Security Flaw Without Disabling Iptables
09:51 February 8, 2022
09:47 February 8, 2022
09:47 February 8, 2022
09:46 February 8, 2022
09:46 February 8, 2022
Comments on a static website? That’s possible with utteranc.es!
09:39 February 8, 2022
09:37 February 8, 2022
09:35 February 8, 2022
09:29 February 8, 2022
09:29 February 8, 2022
15:35 February 5, 2022
15:34 February 5, 2022
Tutorial: How to Add Self-hosted Comments to Your Static Site
15:33 February 5, 2022
15:32 February 5, 2022
15:31 February 5, 2022
10:30 February 5, 2022
16:16 February 4, 2022
16:12 February 4, 2022
16:01 February 4, 2022
16:00 February 4, 2022
15:59 February 4, 2022
Build a Search Bar for Your Hugo Blog With a JSON Index and Some Vanilla JS
15:59 February 4, 2022
15:58 February 4, 2022
15:56 February 4, 2022
15:56 February 4, 2022
15:55 February 4, 2022
15:54 February 4, 2022
21:54 January 29, 2022
21:54 January 29, 2022
21:20 January 29, 2022
How the Bootstrap 4 Grid Works
This also helps with understanding Bootstrap 5 as well. That was something that I discovered while porting a website from WordPress to Hugo.
21:14 January 29, 2022
21:13 January 29, 2022
21:12 January 29, 2022
21:04 January 29, 2022
How to Open Link in New Tab with Hugo’s new Goldmark Markdown Renderer
21:04 January 29, 2022
21:03 January 29, 2022
21:02 January 29, 2022
21:02 January 29, 2022
21:01 January 29, 2022
21:00 January 29, 2022
Overview of the best commenting systems for your static website
11:55 January 27, 2022
11:54 January 27, 2022
11:52 January 27, 2022
11:50 January 27, 2022
11:49 January 27, 2022
11:49 January 27, 2022
11:48 January 27, 2022
11:48 January 27, 2022
11:47 January 27, 2022
09:00 January 24, 2022
18:16 January 23, 2022
18:16 January 23, 2022
18:15 January 23, 2022
18:14 January 23, 2022
08:36 January 23, 2022
How to upgrade Debian 10 to Debian 11 Bullseye using the CLI
08:32 January 23, 2022
15:51 January 22, 2022
15:17 January 22, 2022
11:13 January 22, 2022
11:12 January 22, 2022
11:12 January 22, 2022
11:11 January 22, 2022
11:11 January 22, 2022
11:06 January 22, 2022
11:05 January 22, 2022
10:48 January 22, 2022
11:07 January 20, 2022
13:00 January 19, 2022
15:14 January 18, 2022
13:55 January 16, 2022
18:22 January 13, 2022
13:17 January 8, 2022
18:12 January 2, 2022
18:12 January 2, 2022
18:11 January 2, 2022
17:59 December 24, 2021
17:04 December 10, 2021
16:56 December 10, 2021
10:07 December 9, 2021
10:05 December 9, 2021
13:47 December 7, 2021
11:36 December 2, 2021
15:11 November 30, 2021
14:44 November 30, 2021
18:55 November 29, 2021
[Postfix] – warning: mail_queue_enter: create file maildrop Permission denied
14:52 November 17, 2021
14:42 November 17, 2021
08:16 November 17, 2021
09:05 November 13, 2021
13:18 November 9, 2021
13:18 November 9, 2021
09:01 November 5, 2021
How to Enable clipboard and folder sharing in Qemu/KVM on Windows Guest
08:59 November 5, 2021
08:50 November 5, 2021
“Error 1067: The process terminated unexpectedly” on Windows 10, 7 & 8
16:38 November 4, 2021
Error: No CurrentVersion entry in Software/JavaSoft registry
10:00 November 4, 2021
20:40 November 2, 2021
20:38 November 2, 2021
20:37 November 2, 2021
20:37 November 2, 2021
13:43 November 2, 2021
How to Change the Default Browser in Windows 11, Even for Widgets and Search
How to Move the Taskbar to the Top in Windows 11
How to Replace the Start Menu in Windows 11
13:57 October 30, 2021
20:09 October 26, 2021
16:15 October 26, 2021
16:15 October 26, 2021
16:14 October 26, 2021
17:09 October 24, 2021
17:09 October 24, 2021
17:08 October 24, 2021
How To Convert VirtualBox Disk Image (VDI) and img to Qcow2 format
17:08 October 24, 2021
17:07 October 24, 2021
17:06 October 24, 2021
21:07 October 22, 2021
How to Enable HTTP/2 in Apache Web Server on Ubuntu and Debian
10:29 October 21, 2021
10:29 October 21, 2021
15:46 October 19, 2021
How to Run Windows 11 on a USB Drive (and Take it With You)
How to Bypass Windows 11’s TPM Requirement and Upgrade from Windows 10
13:12 October 12, 2021
15:31 October 8, 2021
15:30 October 8, 2021
15:29 October 8, 2021
Enable Virtualization-based Protection of Code Integrity in Microsoft Windows
15:28 October 8, 2021
18:25 October 5, 2021
17:05 October 5, 2021
11:47 October 2, 2021
11:46 October 2, 2021
19:21 October 1, 2021
13:26 September 29, 2021
14:48 September 28, 2021
15:14 September 25, 2021
Whitelist an IP using WAF -- ModSecurity Whitelisting IP addresses
10:59 September 25, 2021
14:56 September 24, 2021
14:56 September 24, 2021
09:03 September 24, 2021
09:03 September 24, 2021
09:02 September 24, 2021
09:02 September 24, 2021
13:07 September 23, 2021
13:06 September 23, 2021
13:06 September 23, 2021
09:10 September 23, 2021
09:09 September 23, 2021
17:09 September 22, 2021
17:08 September 22, 2021
17:07 September 22, 2021
17:07 September 22, 2021
09:12 September 22, 2021
16:22 September 21, 2021
08:35 September 20, 2021
Integrating AbuseIPDB with Fail2Ban -- Automatically Report Bad IPs
21:10 September 19, 2021
21:09 September 19, 2021
13:24 September 17, 2021
12:19 September 4, 2021
09:46 September 4, 2021
16:58 August 31, 2021
How to backup and load Cron Jobs from a File in Linux and UNIX? Crontab Command Example
16:58 August 31, 2021
14:19 August 27, 2021
14:19 August 27, 2021
08:46 August 18, 2021
18:26 August 17, 2021
18:26 August 17, 2021
18:25 August 17, 2021
Webmin: One big drawback to using this data centre management tool
10:32 August 13, 2021
18:09 August 12, 2021
18:05 August 12, 2021
How to prevent the “are you sure you want to leave this page?” prompt on Facebook?
18:05 August 12, 2021
Extending a Logical Volume on a Linux Virtual, Cloud or CloudNX server
11:41 August 11, 2021
11:41 August 11, 2021
11:40 August 11, 2021
18:00 July 27, 2021
17:59 July 27, 2021
17:59 July 27, 2021
19:07 July 24, 2021
11:03 July 23, 2021
Change user password in MySQL 5.7 with “plugin: auth_socket”
11:03 July 23, 2021
How to enable AMD Virtualization on the Aorus X570 Motherboard
09:30 July 15, 2021
08:04 July 15, 2021
18:09 July 13, 2021
08:16 July 13, 2021
13:58 July 11, 2021
08:36 July 8, 2021
08:35 July 8, 2021
15:40 July 6, 2021
09:28 July 3, 2021
09:06 July 2, 2021
10:13 July 1, 2021
How to install Windows 11 Insider preview on unsupported devices
14:55 June 28, 2021
13:30 June 24, 2021
23:47 June 5, 2021
16:38 June 3, 2021
13:27 June 3, 2021
10:02 June 1, 2021
11:00 May 28, 2021
10:59 May 28, 2021
10:58 May 28, 2021
10:58 May 28, 2021
10:57 May 28, 2021
dbxcli: A command line tool for Dropbox users and team admins
09:00 May 27, 2021
08:58 May 27, 2021
08:57 May 27, 2021
How to stop loading Microsoft Edge processes at startup on Windows 10
13:50 May 16, 2021
13:49 May 16, 2021
13:46 May 16, 2021
13:42 May 16, 2021
09:34 May 13, 2021
09:33 May 13, 2021
10:47 May 12, 2021
17:01 May 11, 2021
16:55 April 22, 2021
16:54 April 22, 2021
16:48 April 22, 2021
16:48 April 22, 2021
16:47 April 22, 2021
16:46 April 22, 2021
14:19 April 22, 2021
10:02 April 22, 2021
10:00 April 22, 2021
10:00 April 22, 2021
11:37 April 16, 2021
11:37 April 16, 2021
11:36 April 16, 2021
11:33 April 16, 2021
11:32 April 16, 2021
11:30 April 16, 2021
11:30 April 16, 2021
11:29 April 16, 2021
11:29 April 16, 2021
11:16 April 16, 2021
12:52 April 15, 2021
12:59 April 13, 2021
13:08 April 8, 2021
09:42 March 17, 2021
09:09 March 16, 2021
09:08 March 16, 2021
14:06 March 9, 2021
18:38 March 2, 2021
13:48 January 27, 2021
13:46 January 27, 2021
13:39 January 27, 2021
13:38 January 27, 2021
13:37 January 27, 2021
13:35 January 27, 2021
13:34 January 27, 2021
Connecting to Microsoft Exchange Calendar from Mozilla Thunderbird
13:03 January 27, 2021
11:10 January 10, 2021
11:09 January 10, 2021
11:08 January 10, 2021
11:07 January 10, 2021
11:07 January 10, 2021
09:26 January 7, 2021
09:41 December 17, 2020
Using mod_security2 with WordPress
WordPress – Mod_security problems with posts and comments fixed
17:59 December 14, 2020
17:46 December 12, 2020
20:54 December 6, 2020
20:53 December 6, 2020
14:51 November 23, 2020
How to force your computer to download the Windows 10 May 2020 Update
14:44 November 11, 2020
16:00 November 10, 2020
09:18 November 9, 2020
09:27 October 19, 2020
14:16 October 18, 2020
09:31 October 18, 2020
13:36 October 10, 2020
16:12 October 7, 2020
14:59 October 7, 2020
10:55 October 6, 2020
15:15 October 1, 2020
14:03 September 29, 2020
14:02 September 29, 2020
12:36 September 18, 2020
12:35 September 18, 2020
12:34 September 18, 2020
12:33 September 18, 2020
Everything you need to know about DNS -- Plus a list of free public DNS servers
12:27 September 18, 2020
Securing DNS across all of my devices with Pi-Hole + DNS-over-HTTPS + 1.1.1.1
10:47 September 18, 2020
16:11 September 17, 2020
17:04 September 11, 2020
Improve Firefox Performance on Linux by Turning WebRender On
16:46 September 9, 2020
How to Embed an External RSS Feed in WordPress Posts via Shortcode
13:43 July 31, 2020
19:03 July 18, 2020
13:43 July 13, 2020
17:51 July 4, 2020
09:33 June 16, 2020
Linux Mint 20 Blocks Snap App Installs, So Here’s the Workaround
09:30 June 16, 2020
08:11 June 10, 2020
09:31 June 4, 2020
13:48 March 8, 2020
17:11 March 2, 2020
14:27 February 29, 2020
17:05 February 26, 2020
14:55 February 23, 2020
14:51 February 23, 2020
10:35 February 20, 2020
Change User’s MySQL Password | Reset MySQL Root Password Guide
12:38 February 19, 2020
09:35 February 17, 2020
09:34 February 17, 2020
09:32 February 17, 2020
13:14 February 16, 2020
13:10 February 16, 2020
20:34 February 15, 2020
14:29 February 14, 2020
14:29 February 14, 2020
09:46 February 14, 2020
09:45 February 14, 2020
How to move docker data directory to another location on Ubuntu
09:45 February 14, 2020
The Complete Guide to “useradd” Command in Linux – 15 Practical Examples
09:43 February 14, 2020
09:42 February 14, 2020
20:30 February 12, 2020
How to Optimize and Compress JPEG or PNG Images in Linux Command Line
17:41 January 29, 2020
20:21 January 28, 2020
18:37 January 17, 2020
12:45 January 17, 2020
12:44 January 17, 2020
12:43 January 17, 2020
12:43 January 17, 2020
12:42 January 17, 2020
12:41 January 17, 2020
21:01 January 16, 2020
20:59 January 16, 2020
At the time of writing, this website uses an older version of TLS so you may see browser messages on visiting it. Hopefully, that will get sorted since it looks out for a security tool website.
20:57 January 16, 2020
12:19 January 15, 2020
12:17 January 15, 2020
The most important steps to take to make an Apache server more secure
12:17 January 15, 2020
How to Implement Security HTTP Headers to Prevent Vulnerabilities?
12:16 January 15, 2020
21:38 December 31, 2019
21:37 December 31, 2019
14:41 December 24, 2019
14:24 December 24, 2019
How To Protect an Apache Server with Fail2Ban on Ubuntu 14.04
This may refer to an older Ubuntu version but the advice contained in the article remains relevant to current ones. In fact, I have used it to harden some VPS systems that I have. Now, I only need to see what impact this action might have.
13:12 December 23, 2019
16:47 December 6, 2019
16:01 November 26, 2019
21:28 November 7, 2019
15:40 November 7, 2019
12:51 August 31, 2019
22:09 July 6, 2019
14:16 June 11, 2019
14:14 June 11, 2019
14:46 June 10, 2019
10:55 June 8, 2019
How to disable Sign-in screen acrylic (blur) background on Windows 10 May 2019 Update
11:47 May 22, 2019
11:39 January 30, 2019
Psensor – A Graphical Hardware Temperature Monitoring Tool for Linux
13:34 January 29, 2019
20:03 December 8, 2018
How to commit changes to a docker image
Five Ways to Slim Your Docker Images
09:59 December 8, 2018
09:58 December 8, 2018
14:04 December 6, 2018
15:53 December 5, 2018
Show the slide number and total number of slides on every PowerPoint slide
21:28 December 4, 2018
19:53 December 4, 2018
18:03 November 26, 2018
Configure Postfix to Send Mail Using Gmail and Google Apps on Debian or Ubuntu
18:02 November 26, 2018
Configure Postfix to Send Mail Using an External SMTP Server
18:01 November 26, 2018
18:01 November 26, 2018
18:00 November 26, 2018
11:09 November 26, 2018
11:07 November 26, 2018
How to Setup a Complete Mail Server (Postfix) using ‘SquirrelMail’ (Webmail) on Ubuntu/Debian
14:51 November 25, 2018
11:43 November 25, 2018
How to Configure WordPress to Use SMTP For Sending Emails Tutorial
11:42 November 25, 2018
11:41 November 25, 2018
11:41 November 25, 2018
11:39 November 25, 2018
11:38 November 25, 2018
11:38 November 25, 2018
11:37 November 25, 2018
10:51 November 25, 2018
10:45 November 25, 2018
20:31 November 24, 2018
20:30 November 24, 2018
17:44 November 24, 2018
17:37 November 24, 2018
Redirecting HTTP to HTTPS Using .htaccess File: Step by Step
21:45 November 22, 2018
21:43 November 22, 2018
12:10 November 17, 2018
12:08 November 17, 2018
apt-get install linux-image-extra getting “W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.”
12:04 November 17, 2018
15:40 November 4, 2018
Here are the 13 most useful Mac shortcuts that will help you do everything faster
11:02 October 21, 2018
09:05 October 13, 2018
11:48 September 22, 2018
16:12 September 20, 2018
Use an Easy PowerShell Command to Search Files for Information
12:20 September 19, 2018
10:06 September 9, 2018
21:18 August 5, 2018
13:42 July 22, 2018
17:27 July 21, 2018
14:27 July 15, 2018
16:27 July 13, 2018
10:13 June 25, 2018
11:35 June 21, 2018
17:17 June 8, 2018
12:24 June 8, 2018
15:13 May 31, 2018
15:13 May 31, 2018
20:48 May 29, 2018
20:47 May 29, 2018
11:02 May 28, 2018
10:26 May 28, 2018
09:54 May 28, 2018
16:02 May 25, 2018
Performance optimizations you can apply today to load the Matomo JavaScript tracker faster
16:01 May 25, 2018
Different ways of embedding the Matomo tracking code for faster website performance
11:24 May 16, 2018
23:18 May 13, 2018
23:15 May 13, 2018
23:13 May 13, 2018
11:02 May 12, 2018
10:59 May 12, 2018
10:52 May 12, 2018
10:32 May 12, 2018
10:30 May 12, 2018
10:27 May 12, 2018
21:42 May 5, 2018
12:23 April 18, 2018
How to troubleshoot the error code “SEC_ERROR_UNKNOWN_ISSUER” on secure websites
09:34 April 15, 2018
10:08 April 14, 2018
22:25 April 13, 2018
18:20 April 10, 2018
Write your best resume in Word with help from LinkedIn in Resume Assistant
09:59 March 29, 2018
16:37 March 28, 2018
15:58 March 28, 2018
14:12 March 28, 2018
14:00 March 28, 2018
10:35 March 27, 2018
10:33 March 27, 2018
14:03 March 26, 2018
14:05 March 17, 2018
14:01 March 17, 2018
13:59 March 17, 2018
11:11 March 17, 2018
13:53 March 7, 2018
10:17 November 25, 2017
10:17 November 16, 2017
Diving Into the New Gutenberg WordPress Editor (Pros and Cons)
19:11 November 15, 2017
19:09 November 15, 2017
16:44 October 31, 2017
23:34 October 25, 2017
The care and feeding of software engineers (or, why engineers are grumpy)
23:32 October 25, 2017
23:31 October 25, 2017
19:20 October 24, 2017
19:19 October 24, 2017
19:18 October 24, 2017
23:37 October 22, 2017
23:36 October 22, 2017
23:32 October 22, 2017
23:31 October 22, 2017
23:30 October 22, 2017
23:29 October 22, 2017
23:25 October 22, 2017
10:19 October 14, 2017
17:03 October 7, 2017
17:01 October 7, 2017
Get rid of those extra TIFFs & PSDs in your Lightroom Library fast!
11:57 September 15, 2017
09:47 September 11, 2017
09:45 September 11, 2017
17:11 August 13, 2017
14:21 July 22, 2017
12:13 July 8, 2017
20:03 July 1, 2017
18:58 June 21, 2017
17:03 April 24, 2017
12:01 April 2, 2017
Windows 7: Windows 7 Not Updating
Windows Update error “0x80070002” or “0x80070003”
Fix Windows Update errors by using the DISM or System Update Readiness tool
18:17 March 22, 2017
23:25 March 12, 2017
22:08 March 7, 2017
Review: Evoluent Vertical Mouse 4 (and how to make it work in Ubuntu)
11:14 February 25, 2017
18:38 February 16, 2017
18:34 February 16, 2017
10:35 February 5, 2017
00:45 December 3, 2016
16:02 July 18, 2016
18:21 June 9, 2016
15:22 May 13, 2016
15:13 January 15, 2016
Get rid of the annoying formatting pop-up when you paste in Word
11:15 December 5, 2015
16:23 December 4, 2015
14:08 December 3, 2015
14:07 December 3, 2015
22:16 November 12, 2015
11:08 November 12, 2015
Fedora 23/22/21 nVidia Drivers Install Guide
09:56 October 30, 2015
20:15 October 29, 2015
20:10 October 29, 2015
20:06 October 29, 2015
21:01 October 2, 2015
22:02 September 28, 2015
11:28 August 7, 2015
16:14 July 27, 2015
11:18 July 24, 2015
18:40 July 10, 2015
15:16 July 9, 2015
18:41 July 6, 2015
07:24 July 2, 2015
The Command Prompt is Outdated: 2 Command Prompt Replacements for Windows
6 Great Windows 10 Features You Can Get Today on Windows 7 or 8
07:35 June 23, 2015
20:12 June 18, 2015
12:08 May 8, 2015
20:00 May 4, 2015
20:00 May 4, 2015
11:07 May 4, 2015
10:51 May 1, 2015
10:44 April 16, 2015
10:39 April 13, 2015
09:45 April 12, 2015
09:45 April 12, 2015
15:04 April 11, 2015
12:42 April 6, 2015
14:01 April 3, 2015
How to fix “System program problem detected” error on Ubuntu
19:27 March 28, 2015
11:34 March 27, 2015
11:21 March 27, 2015
11:04 March 27, 2015
16:51 March 26, 2015
16:53 March 18, 2015
04:00 March 7, 2015
02:39 March 5, 2015
Google Translate CLI Lets You Translate Text From The Command Line
01:51 March 5, 2015
23:19 February 21, 2015
14:25 February 19, 2015
11:56 February 16, 2015
22:29 February 9, 2015
15:45 February 5, 2015
Switch Windows by Hovering the Mouse Over a Window in Windows 7 or Vista
10:32 February 4, 2015
15:30 January 30, 2015
10:17 January 21, 2015
12:56 December 31, 2014
10:05 December 11, 2014
17:05 December 9, 2014
16:22 December 6, 2014
18:45 December 5, 2014
The crop tool is stuck in a fixed shape. How can I make it work properly?
14:55 November 26, 2014
22:12 November 18, 2014
How To Install MATE Desktop on Ubuntu 14.04 LTS
Cinnamon 2.4 Debuts With New Features, Here’s How To Install It In Ubuntu
FSF-Endorsed Linux Distro ‘Trisquel 7.0′ Released
19:53 November 11, 2014
21:54 November 4, 2014
21:52 November 4, 2014
22:30 October 30, 2014
21:34 June 11, 2014
18:57 January 24, 2014
Archive area of old releases of Java for those who need them.
Like Fedora, Manjaro also installs a package for VirtualBox Guest Additions when you install the Linux distro in a VirtualBox virtual machine. However, it does have certain expectations when doing this. On many systems and my own is one of these, Linux guests are forced to use the VMSVGA virtual graphics controller while Windows guests are allowed to use the VBoxSVGA one. It is the latter that Manjaro expects so you get a message like the following appearing when the desktop environment has loaded:
Windows Resizing
Set your VirtualBox Graphics Controller to enable windows resizing
After ensuring that gcc, make, perl and kernel headers are installed, I usually install VirtualBox Guest Additions myself from the included ISO image and so I did the same with Manjaro. Doing that and restarting the virtual machine got me extra functionality like screen resizing and being able to copy and paste between the VM and elsewhere after choosing the Bidirectional setting in the menus under Devices > Shared Clipboard.
That still left an unwanted message popping up on startup. To get rid of that, I just needed to remove /etc/xdg/autostart/mhwd-vmsvga-alert.desktop. It can be deleted but I just moved it somewhere else and a restart proved that the message was gone as needed. Now everything is working as I wanted.
Recently, I recently treated myself to a Sigma 18-125 mm f/3.8-5.6 DC HSM zoom lens for my Pentax K10D. There was a wait for the item to appear and I then found that the lens’ autofocus facility wasn’t compatible with the body. Standard wisdom would have it that I sent the thing back and ask for a replacement or a refund.
Perhaps inexplicably, I did neither. In fact, I came to the conclusion, that since I make photos of landscapes anyway, that been slowed down by the lack of autofocus was no bad thing except perhaps when appealing light makes fleeting appearances. It is true to say that a used Pentax manual focus lens would have been cheaper but I did what I did.
The camera’s autofocus indicator still works and the 18-55 mm zoom that came with the camera wasn’t impressive anyway, so taking matters into my own hands was something that happened a lot. Now, I have better quality glass in front of the sensor and with a metal mount and longer range too. The lens comes with a petal hood too, though I keep that for when I really need it rather than keeping it on the lens and stopping myself focussing the thing.
Speaking of zooming and focussing, the controls work well and smoothly without being at all loose. The AF setting gets used to lock the focus and the zoom can be locked at the wide end so that the lens doesn’t get into the habit of zooming under the influence of gravity, not a bad thing. For future lens purchases, I might be more inclined to ask about compatibility next time around (I may have been spoiled by the Canons that I used to use) but I remain content for now.
All in all, it feels like a quality item and it’s a pity that Pentax saw fit to make the changes that they made, or that Sigma didn’t seem to have kept up with them. Saying that, my photographic subjects usually don’t run off so being slowed down is no bad thing at all, especially if it makes me create better photos.
At some point, I managed to lose the ability to have tab key based autocompletion on terminal sessions on my Ubuntu GNOME machine. Wanting it back had me turn to the web for an answer and I found it on a Linux Mint forum; the bash shell is so pervasive in the UNIX and Linux worlds that you can look anywhere for a fix like this.
The problem centred around the .bashrc file in my home area. It does have quite a few handy custom aliases and I must have done a foolish spring clean on the file sometime. That is the only way that I can explain how the following lines got removed:
if [ -f /etc/bash_completion ]; then
. /etc/bash_completion
fi
What they do is look to see if /etc/bash_completion can be found on your system and to use it for tab-based autocompletion. With the lines not in .bashrc, it couldn’t happen. Others may replace bash_completion with bash.bashrc to got a fuller complement of features but I’ll stick with what I have for now.
Recently, a client of mine updated one of their systems from SAS 9.4 M5 to SAS 9.4 M7. In spite of performing due diligence regarding changes between the maintenance release, a change in behaviour of the SYSODSESCAPECHAR automatic macro variable surprised them. The macro variable captures the assignment of the ODS escape character used to prefix RTF codes for page numbering and other things. That setting is made using an ODS ESCAPECHAR statement like the following:
ods escapechar="~";
In the M5 release, the tilde character in this example was output by the automatic macro variable but that changed in the M7 release to 7E, the hexadecimal code for the same and this tripped up one of their validated macro programs used in output production. The adopted solution was to use the escape sequence (*ESC*) that gave the same outcome that was there before the change. That was less verbose than alternative code changing the hexadecimal code into the expected ASCII character that follows.
data _null_;
call symput("new",byte(input("&sysodsescapechar.",hex.)));
run;
The above supplies a hexadecimal code to the BYTE function for correct rendering with the SYMPUT routine assigning the resulting value to a macro variable named new. Just using the escape sequence is far more succinct though there is now an added validation need once user pilot testing has completed. In my line of business, the updating of code is the quickest part of many such changes; documentation and testing always take longer.
Automation of writing using AI has become prominent recently, especially since GPT came to everyone’s notice. It is more than automation of proofreading but of producing the content itself, as Mark Hinkle and Luke Matthews can testify. Figuring out how to use Generative AI needs more than one line prompts, so knowing what multi-line ones will work is what is earning six digit annual salaries for some.
Recently, I gave this a go when writing a post that used content from a Reddit post thread. The first step was to extract the content from the thread, and I found that I could use R to do this. That meant installing the RedditExtractoR package using the following command:
install.packages("RedditExtractoR")
Then, I created a short script containing the following lines of code with placeholders added in place of the actual locations:
library("RedditExtractoR")
write.csv(get_thread_content("<URL for Reddit post thread>"), "<location of text file>")
The first line above calls the RedditExtractoR package for use so that its get_thread_content function could be used to scape the thread’s textual content. This was then fed to write.csv for writing out a text file with content.
Once I had the text file, I could upload it to Anthropic’s Claude for the next steps. Firstly, I got it to give me a summary of the thread discussion before I asked it to give me the suggested solutions to the issue. Impressively, it capably provided me with the latter.
Now armed with these answers, I set to crafting the post from them. Claude did not do all the work for me, but it certainly helped with the writing. This is something that I fancy exploring further, especially given how business computing is likely to proceed in the next few years.
The Windows 2000 command line feels an austere primitive when compared with the wonders of the UNIX/Linux equivalent. Windows XP feels a little better and PowerShell is another animal altogether. With the latter pair, you do get file or folder autocompletion upon hitting the TAB key. What I didn’t realise until recently was that continued tabbed cycled through the possibilities; I was hitting it once and retyping when I got the wrong folder or file. I stand corrected. With the shell in Linux/UNIX, you can get a listing of possibilities when you hit TAB for the second time and the first time only gives you completion as far as it can go with certainty; you’ll never get to the wrong place but you may not get anywhere at all. This works for bash but not ksh88 as far as I can see. It’s interesting how you can take two different approaches in order to reach the same end.