Getting Gnome Shell going for Fedora 16 running in VirtualBox

There are a number of complaints out there about how hard it is to get GNOME Shell running for a Fedora 16 installation in a VirtualBox virtual machine. As with earlier versions of Fedora, preparation remains a matter of having make, gcc and kernel-devel (kernel headers, in other words). While I have got away with just those, adding dkms (dynamic kernel module support) to the list might be no bad idea either. To get all of those instated, it is a matter of running the following command as root or using sudo:

yum -y install make gcc kernel-devel dkms

The -y switch ensures that any Y/N prompts that usually appear are suppressed and that the installation is completed. Just leave it out if you are inclined to get second thoughts. Another item that has been needed with a previous release of Fedora is libgomp but I haven’t had to add this for Fedora 16 if I remember correctly.

Once those are in place, it is time to install the VirtualBox Guest Additions.  Going to Devices > Install Guest Additions… mounts a virtual CD that can be used for the installation of the various drivers that are needed. To do the installation, first go to where the installer is located using the following command:

cd /media/VBOXADDITIONS_4.1.6_74713/

Note that this location will change according to the release and build numbers of VirtualBox but the process essentially will be the same other than this. Once in there, issue the following command as root or using sudo:

./VBoxLinuxAdditions.run

Hopefully, this will complete without errors now with the precursor software that has been added beforehand. However, there is one more thing that needs doing or you will get the GNOME 3 fallback desktop instead. It pertains to SELinux, an old adversary of mine that got in the way when I was setting up a web server on a machine running Fedora. It doesn’t recognise the new VirtualBox drivers as it should so the following command needs executing as root or using sudo:

restorecon -R -v /opt

Doing this restores the SELinux contexts for the /opt directories within which the VirtualBox software directories are found. The -R switch tells it to act recursively and -v makes it verbose. When it has done its work, hopefully successfully, it is time to reboot the virtual machine and you should have a GNOME Shell desktop interface when you log in.

7 comments

Thanks for providing a decent solution to the SELinux problem with gnome-shell and VirtualBox Guest Additions.

There’s a lot of “just disable SELinux” spouting out of other blogs.

Disabling SElinux sounds an easy solution but you’re right that it does nothing about the real issue without causing security problems. Glad to be of assistance.

Pingback: Install Fedora 16 VirtualBox Guest Additions and Get Working Gnome Shell Inside Virtual Machine
Pingback: Links 13/12/2011: Ubuntu at HMV Stores, Ultimate Edition 3.0 Swaps Ubuntu | Techrights

Thanks for the helpful post.

I noticed that sometimes after running the “restorecon -R -v /opt” and rebooting, the default login manager won’t load.

I went ahead and booted in safe mode, ran the suggested command “restorecon -R -v /opt” again, rebooted, and got the manager to load. Hope this helps somebody.

Pingback: Install Fedora 16 VirtualBox Guest Additions and Get Working Gnome Shell Inside Virtual Machine | Nar Guide

Leave a Reply