Tag Archive for administration

Using the Windows Command Line for Security Administration

July 24, 2009 No comments

While there are point and click tools for the job, being able to set up new user groups, attaching them to folders and assign uses to them using the command line has major advantages when there are a number to be set up and logs of execution can be retained too. In light of this, it seems a shame that terse documentation along with its being hard to rack down answers to any questions using Google, or whatever happens to be your search engine of choice, makes it less easy to discern what commands need to be run. This is where a book would help but the whole experience is in direct contrast to the community of information providers that is the Linux user community, with Ubuntu being a particular shining example. Saying that, the Windows help system is not so bad once you can track down what you need. For instance, knowing that you need commands like CACLS and NET LOCALGROUP, the ones that have been doing the back work for me, it offers useful information quickly enough. To illustrate the usefulness of the aforementioned commands, here are a few scenarios.

Creating a new group:

net localgroup [name of new group] /comment:”[more verbose description of new group]“ /add

Add a group to a folder:

cacls [folder address] /t /e /p [name of group]

The /t switch gets cacls to apply changes to the ACL for the specified folder and all its subfolders, recursive action in other words, while the /e specifies ACL editing rather than its replacement and /p induces replacement of permissions for a given user or group. Using :n, :f, :c or :r directly after the name of a specified user or group assigns no, full, change (write) or read access, respectively. Replacing /p with /r revokes access and leaving off the :n/:f/:c/:r will remove the group or user from the folder.

Add a user to a group:

net localgroup [name of group] [user name (with domain name if on a network)] /add

In addition to NET LOCALGROUP, there is also NET GROUP for wider network operations, something that I don’t have cause to do. Casting the thinking net even wider, I suspect that VB scripting and its ability to tweak the Windows Management Interface might offer more functionality than what is above (PowerShell also comes to mind while we are on the subject) but I am sharing what has been helping me and it can be hard to find if you don’t know where to look.

Scripting, Security, Software, Windows

, , , , , , ,

Self-hosted web analytics tracking

April 24, 2009 No comments

It amazes me now to think how little tracking I used to do on my various web “experiments” only a few short years ago. However, there was a time when a mere web counter, perhaps displayed on web pages themselves, was enough to yield some level of satisfaction, or dissatisfaction in many a case. Things have come a long way since then and we now seem to have analytics packages all around us. In fact, we don’t even have to dig into our pockets to get our hands on the means to peruse this sort of information either.

At this point, I need to admit that I am known to make use of a few simultaneously but thoughts about reducing their number are coming to mind but there’ll be more on that later. Given that this site is hosted using WordPress software, it should come as no surprise that Automattic’s own plugin has been set into action to see how things are going. The main focus is on the total number of visits by day, week and month with a breakdown showing what pages are doing well as well as an indication of how people came to the site and what links they followed while there. Don’t go expecting details of your visitors like the software that they are using and the country where they are accessing the site with this minimalist option and satisfaction should head your way.

There is next to no way of discussing the subject of website analytics without mentioning Google’s comprehensive offering in the area. You have to admit that it’s comprehensive with perhaps the only bugbear being the lack of live tracking. That need has been addressed very effectively by Woopra, even if its WordPress plugin will not work with IE6. Otherwise, you need the desktop application (being written in Java, it’s a cross-platform affair and I have had it going in both Windows and Linux) but that works well too. Apart maybe from the lack of campaigns, Woopra supplies as good as all of the information that its main competitor provides. It certainly doe what I would need from it.

However, while they can be free as in beer, there are a some costs associated with using using external services like Google Analytics and Woopra. Their means of tracking your web pages for you is by executing a piece of JavaScript that needs to be added to every page. If you have everything set to use a common header or footer page, that shouldn’t be too laborious and there are plugins for publishing platforms like WordPress too. This way of working means that if anyone has JavaScript disabled or decides not to enable JavaScript for the requisite hosts while using the NoScript extension with Firefox, then your numbers are scuppered. Saying that, the same concerns probably any JavaScript code that you may want to execute but there’s another cost again: the calls to external websites can, even with the best attention in the world, slow down the loading of your own pages. Not only is additional JavaScript being run but there also is the latency caused by servers having to communicate across the web.

A self-hosted analytics package would avoid the latter and I found one recently through Lifehacker. Amazingly, it has been around for a while and I hadn’t known about it but I can’t say that I was actively looking for it either. Piwik, formerly known as PHPMyVisites, is the name of my discovery and it seems not too immature either. In fact, I’d venture that it does next to everything that Google Analytics does. While I’d prefer that it used PHP, JavaScript is its means of tracking web pages too. Nevertheless, page loading is still faster than with Google Analytics and/or Woopra and Firefox/NoScript users would only have to allow JavaScript for one site too. If you have had experience with installing PHP/MySQL powered publishing platforms like WordPress, Textpattern and such like, then putting Piwik in place is no ordeal. You may find yourself changing folder access but uploading of the required files, the specification of database credentials and adding an administration user is all fairly standard stuff. I have the thing tracking this edifice as well as my outdoor activities (hillwalking/cycling/photography) web presence and I cannot say that I have any complaints so we’ll see how it goes from here.

Blogging, Scripting, Web, Web Development, Web Technologies, Web Tools

, , , , , , , , , , , , , , , , , , ,

A new feature request for Textpattern?

April 22, 2009 No comments

Having been doing some updates to articles in A Wanderer’s Miscellany, an idea that makes life easier when working in Textpattern with old articles has come to mind. Currently, there is no way to navigate through pages in the administration area other than using the search or previous/next functionality. I have gotten to thinking that being able to subset articles by section or category using drop down menus would be a good way forward. A search for a suitable plugin was set in train but it yielded nothing of immediate use (amazingly, no one has given it a go thus far), hence the thinking regarding a new feature request. There is a place on the Txp support forum for exactly this kind of thing and I am in the throes of plucking up the courage to go for it. Apparently, some code cutting of my own would grease the wheels for the progression of any such thing but I remain unsure as to how far I want to go down that route so a bare request might be what they get. Moving to an alternative platform might be an alternative proposition but I see little reason in doing so when what I have otherwise works well for what I want it to do. That Textpattern feature request might just come into being…

Web 2.0, Web Development, Web Technologies, Web Tools

, , , , , , ,

Adding a new hard drive to Ubuntu

January 19, 2009 No comments

This is a subject that I thought that I had discussed on this blog before but I can’t seem to find any reference to it now. I have discussed the subject of adding hard drives to Windows machines a while back so that might explain what I was under the impression that I was. Of course, there’s always the possibility that I can’t find things on my own blog but I’ll go through the process.

What has brought all of this about was the rate at which digital images were filling my hard disks. Even with some housekeeping, I could only foresee the collection growing so I went and ordered a 1TB Western Digital Caviar Green Power from Misco. City Link did the honours with the delivery and I can credit their customer service with regard to organising delivery without my needing to get to the depot to collect the thing; it was a refreshing experience that left me pleasantly surprised.

For the most of the time, hard drives that I have had generally got on with the job there was one experience that has left me wary. Assured by good reviews, I went and got myself an IBM DeskStar and its reliability didn’t fill me with confidence and I will not touch their Hitachi equivalents because of it (IBM sold their hard drive business to Hitachi). This was a period in time when I had a hardware faltering on me with an Asus motherboard putting me off that brand around the same time as well (I now blame it for going through a succession of AMD Athlon CPU’s). The result is that I have a tendency to go for brands that I can trust from personal experience and both Western Digital falls into this category (as does Gigabyte for motherboards), hence my going for a WD this time around. That’s not to say that other hard drive makers wouldn’t satisfy my needs since I have had no problems with disks from Maxtor or Samsung but Ill stick with those makers that I know until they leave me down, something that I hope never happens.

GParted running on Ubuntu

GParted running on Ubuntu

Anyway, let’s get back to installing the hard drive. The physical side of the business was the usual shuffle within the PC to add the SATA drive before starting up Ubuntu. From there, it was a matter of firing up GParted (System -> Administration -> Partition Editor on the menus if you already have it installed). The next step was to find the new empty drive and create a partition table on it. At this point, I selected msdos from the menu before proceeding to set up a single ext3 partition on the drive. You need to select Edit -> Apply All Operations from the menus set things into motion before sitting back and waiting for GParted to do its thing.

After the GParted activities, the next task is to set up automounting for the drive so that it is available every time that Ubuntu starts up. The first thing to be done is to create the folder that will be the mount point for your new drive, /newdrive in this example. This involves editing /etc/fstab with superuser access to add a line like the following with the correct UUID for your situation:

UUID=”32cf775f-9d3d-4c66-b943-bad96049da53″ /newdrive ext3 defaults,noatime,errors=remount-ro

You can can also add a comment like “# /dev/sdd1″ above that so that you know what’s what in the future. To get the actual UUID that you need to add to fstab, issue a command like one of those below, changing /dev/sdd1 to what is right for you:

sudo vol_id /dev/sdd1 | grep “UUID=” /* Older Ubuntu versions */

sudo blkid /dev/sdd1 | grep “UUID=” /* Newer Ubuntu versions */

This is the sort of thing that you get back and the part beyond the “=” is what you need:

ID_FS_UUID=32cf775f-9d3d-4c66-b943-bad96049da53

Once all of this has been done, a reboot is in order and you then need to set up folder permissions as required before you can use the drive. This part gets me firing up Nautilus using gksu and adding myself to the user group in the Permissions tab of the Properties dialogue for the mount point (/newdrive, for example). After that, I issued something akin to the following command to set global permissions:

chmod 775 /newdrive

With that, I had completed what I needed to do to get the WD drive going under Ubuntu. After that IBM DeskStar experience, the new drive remains on probation but moving some non-essential things on there has allowed me to free some space elsewhere and carry out a reorganisation. Further consolidation will follow but I hope that the new 931.51 GiB (binary gigabytes or 1024*1024*1024 rather the decimal gigabytes (1,000,000,000) preferred by hard disk manufacturers) will keep me going for a good while before I need to add extra space again.

Hardware, Linux

, , , , , , , , , , , , , , , , ,

WordPress plugin for removing post revisions from database

July 29, 2008 3 comments

WordPress 2.6 added post revisions as a new feature that is turned on by default. In an earlier post, I described how you could control this by editing wp-config.php and there are a number of plugins that purport to provide the same level of control through the administration screens. Even so, I decided to look at things from the housekeeping side of things and create my own plugin for clearing the database of revisions at one swoop. Currently, it takes out all revisions but I am thinking of adding the facility for selecting which revision to keep and which to delete. It goes without saying that you should back up your database first in case anything might go wrong.

Download Remove Revisions 1.0

Blogging, Web 2.0, Web Development

, , , , , , , , ,
  Recent Entries »

  • As is commonly the case with places like these, all the views that you find expressed on here in postings and articles are mine alone and not those of any organisation with which I have any association, through work or otherwise. With regards to any comments left on the site, I reserve the right to reject any that are inappropriate. Otherwise, whatever is said is the sole responsibility of whoever is leaving the comment.