Archive for November, 2009

A use for choice

November 8, 2009 No comments

After moving to Ubuntu 9.10, Brasero stopped behaving as well as it did in Ubuntu 9.04. Any bootable disks that I have created with it weren’t without glitches. After a recent update, things got better with a live CD actually booting up a PC rather than failing to find a file system like those created with its forbear. While unsure if the observed imperfections stemmed from my using the RC for the upgrades and installations, I got to looking for a solution and gave K3b a go. It certainly behaves like I’d expect it and a live CD created with it worked without fault. The end result is that Brasero has been booted off my main home system for now. That may mean that all of the in-built GNOME convenience is lost to me but I can live without the extras; after all, it’s the quality of the created disks that matters.

K3b

Linux, Software

, , , , , ,

DePo Masthead

November 6, 2009 3 comments

There is a place on WordPress.com where I share various odds and ends about public transport in the U.K. It’s called On Trains and Buses and I try not to go tinkering with the design side of things too much. You only have the ability to change the CSS and my previous experience of doing that with this edifice while it lived on there taught me not to expect too much even if there are sandbox themes for anyone to turn into something presentable, not that I really would want to go doing that in full view of everyone (doing if offline first and copying the CSS afterwards when it’s done is my preferred way of going about it). Besides, I wanted to see how WordPress.com fares these days anyway.

While my public transport blog just been around for a little over a year, it’s worn a few themes over that time, ranging from the minimalist The Journalist v1.9 and Vigilance through to Spring Reloaded. After the last of these, I am back to minimalist again with DePo Masthead, albeit with a spot of my own colouring to soften its feel a little. I must admit growing to like it but it came to my attention that it was a bespoke design from Derek Powazek that Automattic’s Noel Jackson turned into reality. The result would appear that you cannot get it anywhere but from the WordPress.com Subversion theme repository. For those not versed in the little bit of Subversion action that is needed to get it, I did it for you and put it all into a zip file without making any changes to the original, hoping that it might make life easier for someone.

Download DePo Masthead

Blogging, Software, Web, Web 2.0, Web Development, Web Technologies, Web Tools

, , , , , , , , , ,

A case of double vision?

November 4, 2009 No comments

One of the early signs that I noticed after upgrading my main PC to Ubuntu 9.10 was a warning regarding the health of one of my hard disks. Others have reported that this can be triggered by the least bit of roughness in a SMART profile but that’s not how it was for me. The PATA disk that has hosted my Ubuntu installation since the move away from Windows had a few bad sectors but no adverse warning. It was a 320 GB Western Digital SATA drive that was raising alarm bells with its 200 bad sectors.

The conveyor of this news was Palimpsest (not sure how it got that name even when I read the Wikipedia entry) and that is part of the subject of this post. Some have been irritated by its disk health warnings but it’s easy to make them go away by turning off Disk Notifications in the dialogue that going to System > Preferences > Startup Applications will bring up for you. To fire up Palimpsest itself, there’s always the command line but you’ll find it at System > Administration > Disk Utility too. My complaint about it is that I see the same hard drive listed in there more than once and it takes some finding to separate the real entries from the “bogus” ones. Whether this is because Ubuntu has seen my SATA drives with SIL RAID mappings (for the record, I have no array set up) or not is an open question but it’s one that needs continued investigation and I already have had a go with the dmraid command. Even GParted shows both the original /dev/sd* type addressing and the /dev/mapper/sil_* equivalent with the latter being the one with which you need to work (Ubuntu now lives on a partition on one of the SATA drives which is why I noticed this). All in all, it looks less than tidy so additional interrogation is in order, especially when I have no recollection of 9.04 doing anything of the sort.

Palimpsest Disk Utility

Hardware, Linux, Software

, , , , , , , , , , ,

A certain lack of speed

November 2, 2009 No comments

A little while, I encountered a problem with ImageMagick processing DNG files in Ubuntu 9.04. Not realising that I could solve me own problem by editing a file named delegates.xml, I took to getting a Debian VM to do the legwork for me. That’s where you’ll find all the commands used when helper software is used by ImageMagick to help it on its way. On its own, ImageMagick cannot deal with DNG files so the command line variant of UFRaw (itself a front end for DCRaw) is used to create a PNM file that ImageMagick can handle. The problem a few months back was that the command in delegates.xml wasn’t appropriate for a newer version of UFRaw and I got it into my head that things like this were hard-wired into ImageMagick. Now, I know better and admit my error.

With 9.1o, it seems that the command in delegates.xml has been corrected but another issue had raised its head. UFRaw 0.15, it seems, isn’t the speediest when it comes to creating PNM files and, while my raw file processing script works after a spot of modification to deal with changes in output from the identify command used, it takes far too long to run. GIMP also uses UFRaw so I wonder if the same problem has surfaced there too but it has been noticed by the Debian team and they have a package for version 0.16 of the software in their unstable branch that looks as if it has sorted the speed issue. However, I am seeing that 0.15 is in the testing branch so I’d be tempted to stick with Lenny (5.x) if any successor turns out to have slower DNG file handling with ImageMagick and UFRaw. In my estimation, 0.13 does what I need so why go for a newer release if it turns out ot be slower?

Graphics, Imaging, Linux, Software, Virtualisation

, , , , , , , , , , , , , , ,
  Recent Entries »

  • As is commonly the case with places like these, all the views that you find expressed on here in postings and articles are mine alone and not those of any organisation with which I have any association, through work or otherwise. With regards to any comments left on the site, I reserve the right to reject any that are inappropriate. Otherwise, whatever is said is the sole responsibility of whoever is leaving the comment.